Hub swap?

[Razorback_Rob]

Aye like said commonly ph1 were 16 and ph3 are 18 but not guaranteed. To measure undo the pinch bolt at bottom of the hub and take the joint out measure the balljoint and see if they are both the same if so you'll be fine to swap if not you'll need to swap the balljoint when doing the hub. But like I said I got 2 hubs with near new bearings in off a phase 3 gti-6 for 40 quid fitted on instead of getting new bearings done and also my old hubs were shredding the bolts so if you can get replacements with the bearings already done much easier