14-10-2013, 04:40 PM
The 10mm bolt at the centre of the throttle arm needs undoing slightly and tapped down until it's loose, get a small screwdriver and turn it clockwise 1 notch and tighten it up. It will drop the idle but limit the max throttle.
To overcome this you will now need to undo the other 2 bolts on the arm and push the lever back so it will get more max travel.
Make sense?
To overcome this you will now need to undo the other 2 bolts on the arm and push the lever back so it will get more max travel.
Make sense?
Stage 2 XUD Sedan