06-10-2013, 09:55 AM
Special tools bought so far for disassembly
Head bolt tool
T55 Torx Key Bit Socket Approx 78mm overall length and 1/2 square drive
note!
OK for disassembly but will need a longer one to reassemble if you want to assemble the cams in the head off of the block,
as it wont fit between the cam carriers once the cams are installed.
Valve spring compressor
Needs to be able to compress the springs within the recesses of the head and leave room to remove the valve Colet's
Head bolt tool
T55 Torx Key Bit Socket Approx 78mm overall length and 1/2 square drive
note!
OK for disassembly but will need a longer one to reassemble if you want to assemble the cams in the head off of the block,
as it wont fit between the cam carriers once the cams are installed.
Valve spring compressor
Needs to be able to compress the springs within the recesses of the head and leave room to remove the valve Colet's