(07-09-2013, 10:23 PM)devils_fuel Wrote: I've been wondering if fitting a performance air filter will reduce the coal (it's not wingnutz coal spec) on my Lucas tuned DT as I can't be arsed with the pump detune as it takes for ever to get bang-on and also wastes a pump amount of fuel every time you adjust
Would the extra air help to reduce the coal and if so, which filter so I get? Can I only get cone filters as I presume I can't get a k&n replacement filters for the std air can?
Advice please chaps

Thanks for the reference, but if you're referring to the pics in my project thread, that was just the result of the decat.

but anyway, to echo whats been said above, you can get replacement K&N panel filters, and tbh, they're probably better than using a cone filter, as you don't suck as much hot engine air in.
Regarding the fuel pump, i use a monster can with just the very top cut off, you can just squeeze it in to the gap under the pump, and it means you lose very little diesel when you open the pump up. Also, ive found the "boost compensator" on the Lucas makes very little - if any - difference to the tune. Just wind the wastegate out a bit more on your turbo. Moar boostz FTW!

Oh yeah, and learn the art of "progressive acceleration" as ive seen it called on here, makes a world of difference.

![[Image: P1060836_zpsz3xgxt7q.jpg]](http://i1101.photobucket.com/albums/g427/wingnutz2/P1060836_zpsz3xgxt7q.jpg)