23-08-2013, 11:29 AM
Need to remove the air box and pipework then undo the 2 bolts on the top of the inlet elbow and also the 2 allen bolts on the egr side watch you dont loose the metal gasket as it will drop out the bottom. Then undo a bracket and the clip that holds the elbow to the bottom hose, should come out with some wiggling then. Yea should be able to diy the blank seen cut up coke cans used in the past, just use the metal egr gasket as a guide.
Once thats all cleaned and reassembled, you'll need to disable the egr itself theres a guide in the section to do this
Once thats all cleaned and reassembled, you'll need to disable the egr itself theres a guide in the section to do this