Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Worn master cylinder seals (pics)
#7
(09-08-2013, 09:33 PM)Niall Wrote: Yeah where the hell is your fluid strainer? That should never be removed for this exact reason. To try and stop shit getting in there.

Fluid looks a bit manky though. Id suggest a full system flush. Think you would be surprised at the effect it will have!

(09-08-2013, 09:50 PM)Piggy Wrote: ^^^ as above should be a strainer.

and that fluid needs changing, so just flush it all out Smile



Fluid strainer!? Never had one! What do they look like and where could I get one? No, no, I am not trolling :roll: I had flushed 1 litre of fluid through but then I jacked up one side too high to bleed the brakes with the tank too low so air got into the master cylinder and then I didn't have enough fresh fluid left over so had to flush the old stuff back through again Sad Had to get it done before the MOT you see Sad
(09-08-2013, 10:10 PM)samass Wrote: ew, that's manky!


drain out all the old fluid, then flush the system out by pumping some washing up liquid and water through a few times, then put some fresh brake fluid in, that'll sort her out nicely ThumbsUp Smile

Alright then, should the washing up liquid be with water or just washing up liquid? Gonna get this done next week hopefully. I also have some white spirit, should I chuck some of that in there? Thanks. Oh yeah, I saw you just mentioned water in your post, haha. Gonna start as soon as possible, thanks for the advice Smile
Reply
Thanks given by:


Messages In This Thread
Worn master cylinder seals (pics) - by 306Puggy - 09-08-2013, 05:44 PM
Worn master cylinder seals (pics) - by Jtrigga - 09-08-2013, 09:25 PM
RE: Worn master cylinder seals (pics) - by Niall - 09-08-2013, 09:33 PM
RE: Worn master cylinder seals (pics) - by 306Puggy - 10-08-2013, 07:06 AM
RE: Worn master cylinder seals (pics) - by Piggy - 09-08-2013, 09:50 PM
RE: Worn master cylinder seals (pics) - by samass - 09-08-2013, 10:10 PM
RE: Worn master cylinder seals (pics) - by swampy - 25-08-2013, 05:42 PM
RE: Worn master cylinder seals (pics) - by Niall - 10-08-2013, 10:42 AM
RE: Worn master cylinder seals (pics) - by Niall - 10-08-2013, 11:08 AM
RE: Worn master cylinder seals (pics) - by Piggy - 25-08-2013, 05:47 PM
RE: Worn master cylinder seals (pics) - by swampy - 25-08-2013, 05:53 PM
RE: Worn master cylinder seals (pics) - by samass - 25-08-2013, 06:20 PM
RE: Worn master cylinder seals (pics) - by swampy - 25-08-2013, 06:33 PM
RE: Worn master cylinder seals (pics) - by Piggy - 25-08-2013, 06:52 PM
RE: Worn master cylinder seals (pics) - by samass - 25-08-2013, 07:57 PM
RE: Worn master cylinder seals (pics) - by swampy - 25-08-2013, 08:46 PM
RE: Worn master cylinder seals (pics) - by Piggy - 25-08-2013, 08:57 PM
RE: Worn master cylinder seals (pics) - by Piggy - 25-08-2013, 10:07 PM
RE: Worn master cylinder seals (pics) - by Face. - 26-08-2013, 12:24 PM
RE: Worn master cylinder seals (pics) - by Bender - 27-08-2013, 02:01 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Worn Diff and how to know what gearbox’s what? Rob Mudhouse 13 3,846 17-03-2021, 01:09 PM
Last Post: Rob Mudhouse
  HDi 23.8mm Master Cylinder - Where from? Alan_M 3 1,849 07-09-2016, 02:33 PM
Last Post: Alan_M
  Handling on a worn out rear beam? JTaylor2005 11 4,453 10-08-2015, 04:26 PM
Last Post: JTaylor2005

Forum Jump:


Users browsing this thread: 1 Guest(s)