Project smokey

[Parksy87]

Went about fitting the new o ring.... It was too big :/ but cleaned up all surfaces and refitted making sure everything was tight..... When priming it i noticed a drip from the filter housing to the supply pipe on the pump nipped the jublie up some more and that stopped, also checked my heater plugs, all 4 seem fine.

Then decided to start playing with filler :p the little dent under the boot was sorted ready to smoot off:


Bit more fine filler to fill the dimples/marks:


Then wet n dried the bonnet:


Wash n dry in the morning ready for: