20-03-2013, 11:24 PM
(This post was last modified: 20-03-2013, 11:48 PM by cheesegrater.)
Thought I'd put a small project thread together with the remaining photos I have seeing as I've somehow forgotten my dropbox password!
My car started off in a sorry state having been stood down for a good 3 years or so.
![[Image: p4pb4474221.jpg]](http://gp1.pinkbike.org/p4pb4474221/p4pb4474221.jpg)
It had a poorly sounding 1600 engine which got swapped out for another 1600.
![[Image: p4pb4527717.jpg]](http://gp1.pinkbike.org/p4pb4527717/p4pb4527717.jpg)
Once the massive hole in the fuel pump was sorted I drove it for a year.
![[Image: p4pb5650030.jpg]](http://gp1.pinkbike.org/p4pb5650030/p4pb5650030.jpg)
I then got a tad bored with the 1600 and went for an XU10J4RS!
I decided to rebuild the engine whilst it was out, it seemed silly not to.
![[Image: 321667_10150828094490392_1074901710_n_zp...1363823470]](http://i1280.photobucket.com/albums/a498/cheesegrater89/321667_10150828094490392_1074901710_n_zps734c89d9.jpg?t=1363823470)
This was always going to be a fun fiddly job!
I also fitted a TTV flywheel because I figured Im not pulling the, comparatively speaking, heavier shell of the 306 around.
![[Image: 293591_10150855310680392_2103586494_n-Co...1363823468]](http://i1280.photobucket.com/albums/a498/cheesegrater89/293591_10150855310680392_2103586494_n-Copy_zps77b71693.jpg?t=1363823468)
Can't remember what I was making here but heres my home brew lathe
![[Image: 264599_10150662901505392_2649461_n_zps11...1363823464]](http://i1280.photobucket.com/albums/a498/cheesegrater89/264599_10150662901505392_2649461_n_zps11eb9554.jpg?t=1363823464)
![[Image: 208700_10150559092670392_7808797_n_zps11...1363823460]](http://i1280.photobucket.com/albums/a498/cheesegrater89/208700_10150559092670392_7808797_n_zps1125dba5.jpg?t=1363823460)
Got bored one saturday so I took the 1600 lump out!
I'll update more when I get the time!
My car started off in a sorry state having been stood down for a good 3 years or so.
It had a poorly sounding 1600 engine which got swapped out for another 1600.
Once the massive hole in the fuel pump was sorted I drove it for a year.
I then got a tad bored with the 1600 and went for an XU10J4RS!
I decided to rebuild the engine whilst it was out, it seemed silly not to.
This was always going to be a fun fiddly job!
I also fitted a TTV flywheel because I figured Im not pulling the, comparatively speaking, heavier shell of the 306 around.
Can't remember what I was making here but heres my home brew lathe
Got bored one saturday so I took the 1600 lump out!
I'll update more when I get the time!