15-01-2013, 07:23 PM
I thought the elbow was 2.5 but I might b wrong! I'll let you no 2moro. You will need to cut the slam panel, makes its bit easier if anything!!
The c5 pipe goes from 38mm to 54mm so you need a 38-38 90° for turbo to c5. I used a 41mm bend cos the turbo was slightly bigger being a ko4.
The c5 pipe goes from 38mm to 54mm so you need a 38-38 90° for turbo to c5. I used a 41mm bend cos the turbo was slightly bigger being a ko4.