V6 Brembo

[CJ_Derv]

Just too clarify you need to use tarox discs (g88 from memory?) To stop squealing. The cheap direct fit discs are xantia v6 discs. You also need extended brake lines.

They will not fit behind 15"s unless you space em out massively.

are you doing it for 'show' or 'go'? Cause genuinely the brembo calipers way a load less than 6 ones but the discs way a tonne! The overall weight is more than a 6 setup, and if you get the right pad in 6 calipers you'll outbrake brembos any day...

The only way to reduce the unsprung weight with brembos is to get floating 302mm discs. A chap called ash sells a kit on the 6 forum, but be prepared for a heart-attack when you see the price! Or maybe speak to rippthrough? Either way though, 302mm discs won't fit under 15s!

Will look into these disks then as ive always used the xantia, what spacers would you recommend Ed?

will have them off the blaze next week so can have a trial fit just had 26mm hubcentric spacers on a et15 ford fit 17" and an additional 3mm spacer to fit the brembos on and had a gap of about half a rizla packet left :S was very tight lol