| 
		
	
	
	
		
	Posts: 896 
	Threads: 42 
	Joined: Apr 2012
	
 Reputation: 
2 Location: Lakes District
 Car Model/Spec: 1.9 XUD
 Thanks: 0Given 0 thank(s) in 0 post(s)
 
 
	
	
		Just a few questions.
 First, with black masking crystals, I'm assuming that people use a matt black paint, wondering if a gloss black would work just as well or if anyone has or seen what it would like in graphite (rims are going to be that colour, so it would match them)
 
 Also, they almost, slightly, nearly, kind of, dont fit in the oven (which is how i've heard you separate them), is there any other options?
 
 
 Cheers
 
		
	 
	
	
	
		
	Posts: 8,423 
	Threads: 171 
	Joined: Dec 2011
	
 Reputation: 
46 Location: Portsmouth 
 Car Model/Spec: Black 3dr Dturbo
 Thanks: 0Given 1 thank(s) in 1 post(s)
 
 
	
	
		use whatever paint you want, gloss or matt is fine 
other options are heat gun or if you have depo's then you may be lucky with a hot hair dryer   
		
	 
	
	
	
		
	Posts: 2,659 
	Threads: 115 
	Joined: Apr 2012
	
 Reputation: 
26 Location: Stow
 Car Model/Spec: 306
 Thanks: 3Given 0 thank(s) in 0 post(s)
 
 
	
	
		I used a hair dryer for mine (depo)<!-- l --><a class="postlink-local" href="http://www.306oc.co.uk/forum/viewtopic.php?f=30&t=3212&hilit=Mask+depo" onclick="window.open(this.href);return false;">viewtopic.php?f=30&t=3212&hilit=Mask+depo</a><!-- l -->
 
 
 
 
		
	 
	
	
	
		
	Posts: 896 
	Threads: 42 
	Joined: Apr 2012
	
 Reputation: 
2 Location: Lakes District
 Car Model/Spec: 1.9 XUD
 Thanks: 0Given 0 thank(s) in 0 post(s)
 
 
	
	
		Brilliant cheers, so I would have to hold a hair dryer over it for about half an hour then! What do you mean by depo? is that a make? 
Might have to get vengeful with a hammer   
		
	 
	
	
	
		
	Posts: 2,659 
	Threads: 115 
	Joined: Apr 2012
	
 Reputation: 
26 Location: Stow
 Car Model/Spec: 306
 Thanks: 3Given 0 thank(s) in 0 post(s)
 
 
	
	
		Yes depo is the make if you have got valeo you will probly struggle to open them with a hair dryer if you have depos it can be done with hair dryer just heat a section at a time and gently prise them open    as i did in them pictures   
 
 
 
		
	 
	
	
	
		
	Posts: 5,494 
	Threads: 202 
	Joined: Dec 2011
	
 Reputation: 
58 Location: Eastleigh
 Car Model/Spec: S16 and HDi daily
 Thanks: 2Given 29 thank(s) in 28 post(s)
 
 
	
	
		heat gun will work.. bring them over at some point, I'll get them apart for you
	 
Welding and fabrication projects undertaken, contact me for more information. 
		
	 
	
	
	
		
	Posts: 2,659 
	Threads: 115 
	Joined: Apr 2012
	
 Reputation: 
26 Location: Stow
 Car Model/Spec: 306
 Thanks: 3Given 0 thank(s) in 0 post(s)
 
 
	
	
		^^^^^ this if you have valeo   
 
 
 
		
	 
	
	
	
		
	Posts: 13,881 
	Threads: 476 
	Joined: Dec 2011
	
 Reputation: 
81 Location: Ipswich
 Car Model/Spec: 306 Rallye
 Thanks: 4Given 104 thank(s) in 102 post(s)
 
 
	
	
		heat gun works a trick but dont burn yourself like somebody i know did    erm... gloss black would probably look better than matt black tbh. Ive been thinking of doing mine in ford sea grey so will have to see how it goes!
	
		
	 
	
	
	
		
	Posts: 4,193 
	Threads: 117 
	Joined: Jan 2012
	
 Reputation: 
21 Location: in the pub
 Car Model/Spec: needs bwarrrp.
 Thanks: 0Given 1 thank(s) in 1 post(s)
 
 
	
	
		good luck with this mate. matt/gloss black imo.
	 
		
	 
	
	
	
		
	Posts: 3,762 
	Threads: 9 
	Joined: Dec 2011
	
 Reputation: 
19 Location: Northwest (Cumbria)
 Car Model/Spec: Ph2 DT with big Snail.....
 Thanks: 0Given 3 thank(s) in 1 post(s)
 
 
	
	
		I was going to say what Jonny said    I will get them apart........
 
But is Jonny is having a go then standard procedure is to give me a ring once he breaks them   
		
	 
	
	
	
		
	Posts: 5,494 
	Threads: 202 
	Joined: Dec 2011
	
 Reputation: 
58 Location: Eastleigh
 Car Model/Spec: S16 and HDi daily
 Thanks: 2Given 29 thank(s) in 28 post(s)
 
 
	
	
		I won't break them.. anyway, there's a spare set here, and Carl has 2 sets. It'll be fine!
	 
Welding and fabrication projects undertaken, contact me for more information. 
		
	 
	
	
	
		
	Posts: 38 
	Threads: 6 
	Joined: Apr 2012
	
 Location: Kendal, Cumbria
 Car Model/Spec: Diablo HDI Estate
 Thanks: 0Given 0 thank(s) in 0 post(s)
 
 
	
	
		Lets not lie, you do have a tendency to break things   
		
	 
	
	
	
		
	Posts: 4,883 
	Threads: 198 
	Joined: Jan 2012
	
 Reputation: 
135 Location: Not near you
 Thanks: 0Given 0 thank(s) in 0 post(s)
 
 
	
	
		Graphite grey? SO last year... ![[Image: 15072011543.jpg]](http://i1128.photobucket.com/albums/m481/martypellowe/Yellow/15072011543.jpg)  
And on the estate
 ![[Image: DSCF1867copy.jpg]](http://i1128.photobucket.com/albums/m481/martypellowe/DSCF1867copy.jpg) 
		
	 
	
	
	
		
	Posts: 6,569 
	Threads: 183 
	Joined: Dec 2011
	
 Reputation: 
20 Location: eastwood/notts
 Car Model/Spec: moonstone hdi #2
 Thanks: 0Given 8 thank(s) in 8 post(s)
 
 
	
	
		The graphite looks nice.   .  Been wondering where the yellow sundance went to   .
	
#2 Moonstone Blue HDI ![[Image: 6b0c7309-5184-463c-9f73-2a7b96601418_zpsfdf041fe.jpg]](http://i512.photobucket.com/albums/t326/kent16_2008/6b0c7309-5184-463c-9f73-2a7b96601418_zpsfdf041fe.jpg) 
		
	 
	
	
	
		
	Posts: 8,749 
	Threads: 208 
	Joined: Jan 2012
	
 Reputation: 
60 Location: Wiltshire
 Car Model/Spec: ph2 Gti6 / ph4 HDI Estate 
 Thanks: 1Given 5 thank(s) in 5 post(s)
 
 
	
	
		Be very careful with a heat gun a dont force it as you will snap the lense as i found out lol, oven FTW every time, iv done 4 sets via the oven now and it 100x easyer
	 
![[Image: DSC_0190-Copy_zpsf093f84d.jpg]](http://i1038.photobucket.com/albums/a468/167gti8/DSC_0190-Copy_zpsf093f84d.jpg) Member of 99% warning or your nothing club! 
		
	 
	
	
	
		
	Posts: 5,494 
	Threads: 202 
	Joined: Dec 2011
	
 Reputation: 
58 Location: Eastleigh
 Car Model/Spec: S16 and HDi daily
 Thanks: 2Given 29 thank(s) in 28 post(s)
 
 
	
	
		just be more patient with a heat gun, then ease the lens out, don't force it!.
	 
Welding and fabrication projects undertaken, contact me for more information. 
		
	 
	
	
	
		
	Posts: 4,193 
	Threads: 117 
	Joined: Jan 2012
	
 Reputation: 
21 Location: in the pub
 Car Model/Spec: needs bwarrrp.
 Thanks: 0Given 1 thank(s) in 1 post(s)
 
 
	
	
		puglove Wrote:Be very careful with a heat gun a dont force it as you will snap the lense as i found out lol, oven FTW every time, iv done 4 sets via the oven now and it 100x easyer how long in the oven and what temp?
	 
		
	 
	
	
	
		
	Posts: 5,494 
	Threads: 202 
	Joined: Dec 2011
	
 Reputation: 
58 Location: Eastleigh
 Car Model/Spec: S16 and HDi daily
 Thanks: 2Given 29 thank(s) in 28 post(s)
 
 
	
	
		45 mins at gas mark 7 or until it's golden brown
	 
Welding and fabrication projects undertaken, contact me for more information. 
		
	 
	
	
	
		
	Posts: 896 
	Threads: 42 
	Joined: Apr 2012
	
 Reputation: 
2 Location: Lakes District
 Car Model/Spec: 1.9 XUD
 Thanks: 0Given 0 thank(s) in 0 post(s)
 
 
	
	
		I like the graphite, doing them black just seems a bit too 'typical' 
haha remember its not food and wont taste nice   
		
	 
	
	
	
		
	Posts: 4,193 
	Threads: 117 
	Joined: Jan 2012
	
 Reputation: 
21 Location: in the pub
 Car Model/Spec: needs bwarrrp.
 Thanks: 0Given 1 thank(s) in 1 post(s)
 
 
	
	
		Jonny81191 Wrote:45 mins at gas mark 7 or until it's golden brown whats that in electric?    
		
	 
	
	
	
		
	Posts: 6,569 
	Threads: 183 
	Joined: Dec 2011
	
 Reputation: 
20 Location: eastwood/notts
 Car Model/Spec: moonstone hdi #2
 Thanks: 0Given 8 thank(s) in 8 post(s)
 
 
	
	
		I usually just whack it up full n hope I don't burn anything.  But as for head lights no idea   
#2 Moonstone Blue HDI ![[Image: 6b0c7309-5184-463c-9f73-2a7b96601418_zpsfdf041fe.jpg]](http://i512.photobucket.com/albums/t326/kent16_2008/6b0c7309-5184-463c-9f73-2a7b96601418_zpsfdf041fe.jpg) 
		
	 
	
	
	
		
	Posts: 4,883 
	Threads: 198 
	Joined: Jan 2012
	
 Reputation: 
135 Location: Not near you
 Thanks: 0Given 0 thank(s) in 0 post(s)
 
 
	
	
		50 degrees roughly, good temperature to melt shit
	 
		
	 
	
	
	
		
	Posts: 4,193 
	Threads: 117 
	Joined: Jan 2012
	
 Reputation: 
21 Location: in the pub
 Car Model/Spec: needs bwarrrp.
 Thanks: 0Given 1 thank(s) in 1 post(s)
 
 
	
	
		im on it like a tramp on luke warm chips.
	 
		
	 
	
	
	
		
	Posts: 3,762 
	Threads: 9 
	Joined: Dec 2011
	
 Reputation: 
19 Location: Northwest (Cumbria)
 Car Model/Spec: Ph2 DT with big Snail.....
 Thanks: 0Given 3 thank(s) in 1 post(s)
 
 
	
	
		lowest setting possible for the oven and leave them in for like 20 mins ish (until they are nearly too hot to touch) and then use a heat gun to keep it warm where the glue is   
		
	 
	
	
	
		
	Posts: 6,569 
	Threads: 183 
	Joined: Dec 2011
	
 Reputation: 
20 Location: eastwood/notts
 Car Model/Spec: moonstone hdi #2
 Thanks: 0Given 8 thank(s) in 8 post(s)
 
 
	
	
		Might have a trip to scrappy at weekend and have a to at these for fcs.
	 
#2 Moonstone Blue HDI ![[Image: 6b0c7309-5184-463c-9f73-2a7b96601418_zpsfdf041fe.jpg]](http://i512.photobucket.com/albums/t326/kent16_2008/6b0c7309-5184-463c-9f73-2a7b96601418_zpsfdf041fe.jpg) 
		
	 
	
	
	
		
	Posts: 5,494 
	Threads: 202 
	Joined: Dec 2011
	
 Reputation: 
58 Location: Eastleigh
 Car Model/Spec: S16 and HDi daily
 Thanks: 2Given 29 thank(s) in 28 post(s)
 
 
	
	
		Thinking of doing mine also.. but shadow chrome...
 But that might be too subtle...
 
Welding and fabrication projects undertaken, contact me for more information. 
		
	 
	
	
	
		
	Posts: 896 
	Threads: 42 
	Joined: Apr 2012
	
 Reputation: 
2 Location: Lakes District
 Car Model/Spec: 1.9 XUD
 Thanks: 0Given 0 thank(s) in 0 post(s)
 
 
	
	
		...... what's ........ th...........e crack... wi..th all ....... the .......................???
	 
		
	 
	
	
	
		
	Posts: 3,762 
	Threads: 9 
	Joined: Dec 2011
	
 Reputation: 
19 Location: Northwest (Cumbria)
 Car Model/Spec: Ph2 DT with big Snail.....
 Thanks: 0Given 3 thank(s) in 1 post(s)
 
 
	
	
		  you grumpy bastard Carl    Jonny81191 Wrote:Thinking of doing mine also.. but shadow chrome...
 But that might be too subtle...
 
If you haven't split a set of Valeo lights you are in for a shock    
And yes shadow chrome would be too subtle    
		
	 
	
	
	
		
	Posts: 5,494 
	Threads: 202 
	Joined: Dec 2011
	
 Reputation: 
58 Location: Eastleigh
 Car Model/Spec: S16 and HDi daily
 Thanks: 2Given 29 thank(s) in 28 post(s)
 
 
	
	
		I have split Valeos before, I know what I'm getting into here lol
 Yeah, might just go the wholoe hog and black 'em.......................................................................................
 
Welding and fabrication projects undertaken, contact me for more information. 
		
	 
	
	
	
		
	Posts: 3,762 
	Threads: 9 
	Joined: Dec 2011
	
 Reputation: 
19 Location: Northwest (Cumbria)
 Car Model/Spec: Ph2 DT with big Snail.....
 Thanks: 0Given 3 thank(s) in 1 post(s)
 
 
	
	
		Jonny81191 Wrote:I have split Valeos before, I know what I'm getting into here lol
 Yeah, might just go the wholoe hog and black 'em.......................................................................................
 
Ok......................... good good......................... just checking    
Black is the way to go....................................or something dark coloured at least.............................once you go black you never go back.............................    
		
	 |