![]() |
'Black' Masking Headlights - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22) +--- Forum: Interior, Exterior, ICE (https://www.306oc.co.uk/forum/forumdisplay.php?fid=12) +--- Thread: 'Black' Masking Headlights (/showthread.php?tid=3354) Pages:
1
2
|
'Black' Masking Headlights - c.gerrard - 09-05-2012 Just a few questions. First, with black masking crystals, I'm assuming that people use a matt black paint, wondering if a gloss black would work just as well or if anyone has or seen what it would like in graphite (rims are going to be that colour, so it would match them) Also, they almost, slightly, nearly, kind of, dont fit in the oven (which is how i've heard you separate them), is there any other options? Cheers Re: 'Black' Masking Headlights - 4WayDiablo - 09-05-2012 use whatever paint you want, gloss or matt is fine other options are heat gun or if you have depo's then you may be lucky with a hot hair dryer ![]() Re: 'Black' Masking Headlights - spike2002 - 09-05-2012 I used a hair dryer for mine (depo) <!-- l --><a class="postlink-local" href="http://www.306oc.co.uk/forum/viewtopic.php?f=30&t=3212&hilit=Mask+depo" onclick="window.open(this.href);return false;">viewtopic.php?f=30&t=3212&hilit=Mask+depo</a><!-- l --> Re: 'Black' Masking Headlights - c.gerrard - 09-05-2012 Brilliant cheers, so I would have to hold a hair dryer over it for about half an hour then! What do you mean by depo? is that a make? Might have to get vengeful with a hammer ![]() Re: 'Black' Masking Headlights - spike2002 - 09-05-2012 Yes depo is the make if you have got valeo you will probly struggle to open them with a hair dryer if you have depos it can be done with hair dryer just heat a section at a time and gently prise them open ![]() ![]() Re: 'Black' Masking Headlights - Jonny81191 - 09-05-2012 heat gun will work.. bring them over at some point, I'll get them apart for you Re: 'Black' Masking Headlights - spike2002 - 09-05-2012 ^^^^^ this if you have valeo ![]() Re: 'Black' Masking Headlights - Eeyore - 09-05-2012 heat gun works a trick but dont burn yourself like somebody i know did ![]() Re: 'Black' Masking Headlights - kingy - 10-05-2012 good luck with this mate. matt/gloss black imo. Re: 'Black' Masking Headlights - mark_airey - 10-05-2012 I was going to say what Jonny said ![]() But is Jonny is having a go then standard procedure is to give me a ring once he breaks them ![]() Re: 'Black' Masking Headlights - Jonny81191 - 10-05-2012 I won't break them.. anyway, there's a spare set here, and Carl has 2 sets. It'll be fine! Re: 'Black' Masking Headlights - Chris.M - 10-05-2012 Lets not lie, you do have a tendency to break things ![]() Re: 'Black' Masking Headlights - cwspellowe - 10-05-2012 Graphite grey? SO last year... ![]() And on the estate ![]() 'Black' Masking Headlights - kentiiboii - 10-05-2012 The graphite looks nice. ![]() ![]() Re: 'Black' Masking Headlights - puglove - 10-05-2012 Be very careful with a heat gun a dont force it as you will snap the lense as i found out lol, oven FTW every time, iv done 4 sets via the oven now and it 100x easyer Re: 'Black' Masking Headlights - Jonny81191 - 10-05-2012 just be more patient with a heat gun, then ease the lens out, don't force it!. Re: 'Black' Masking Headlights - kingy - 10-05-2012 puglove Wrote:Be very careful with a heat gun a dont force it as you will snap the lense as i found out lol, oven FTW every time, iv done 4 sets via the oven now and it 100x easyerhow long in the oven and what temp? Re: 'Black' Masking Headlights - Jonny81191 - 10-05-2012 45 mins at gas mark 7 or until it's golden brown Re: 'Black' Masking Headlights - c.gerrard - 10-05-2012 I like the graphite, doing them black just seems a bit too 'typical' haha remember its not food and wont taste nice ![]() Re: 'Black' Masking Headlights - kingy - 10-05-2012 Jonny81191 Wrote:45 mins at gas mark 7 or until it's golden brownwhats that in electric? ![]() 'Black' Masking Headlights - kentiiboii - 10-05-2012 I usually just whack it up full n hope I don't burn anything. But as for head lights no idea ![]() Re: 'Black' Masking Headlights - cwspellowe - 10-05-2012 50 degrees roughly, good temperature to melt shit Re: 'Black' Masking Headlights - kingy - 10-05-2012 im on it like a tramp on luke warm chips. Re: 'Black' Masking Headlights - mark_airey - 10-05-2012 lowest setting possible for the oven and leave them in for like 20 mins ish (until they are nearly too hot to touch) and then use a heat gun to keep it warm where the glue is ![]() 'Black' Masking Headlights - kentiiboii - 10-05-2012 Might have a trip to scrappy at weekend and have a to at these for fcs. Re: 'Black' Masking Headlights - Jonny81191 - 10-05-2012 Thinking of doing mine also.. but shadow chrome... But that might be too subtle... Re: 'Black' Masking Headlights - c.gerrard - 10-05-2012 ...... what's ........ th...........e crack... wi..th all ....... the .......................??? Re: 'Black' Masking Headlights - mark_airey - 10-05-2012 ![]() ![]() Jonny81191 Wrote:Thinking of doing mine also.. but shadow chrome... If you haven't split a set of Valeo lights you are in for a shock ![]() And yes shadow chrome would be too subtle ![]() Re: 'Black' Masking Headlights - Jonny81191 - 10-05-2012 I have split Valeos before, I know what I'm getting into here lol Yeah, might just go the wholoe hog and black 'em....................................................................................... Re: 'Black' Masking Headlights - mark_airey - 10-05-2012 Jonny81191 Wrote:I have split Valeos before, I know what I'm getting into here lol Ok......................... good good......................... just checking ![]() Black is the way to go....................................or something dark coloured at least.............................once you go black you never go back............................. ![]() |