Posts: 4,660
Threads: 343
Joined: Jul 2012
Reputation:
15
Location: Chesterfield
Car Model/Spec: 106 gti / 306 hdi estate
So looking at a brake upgrade for the zx, as it'll need discs and pads before mot. I don't want to get rid if the volcanes for 2 reasons one being I want to keep it original looking out side, and 2 I've just fitted 4 new Michelns not long ago.
So I know it's extremely tight under the volcane wheel but is it possible to fit the 266 brakes under there and if so what needs doing to get them to fit? Will I need spacers?
Thanks in advance
Posts: 6,367
Threads: 87
Joined: Dec 2011
Reputation:
48
Location: South Yorks.
Car Model/Spec: Rouge vallelunga 5 door Dturbo
They're a 15 aren't they? Should piss 266's I would have thought
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Posts: 18,242
Threads: 386
Joined: Dec 2011
Reputation:
87
Location: Suffolk
Car Model/Spec: Focus Titanium
I thought Volcanes were 14s?
It'll be tight if they do fit, 14" swallows only just fit over 266s...all it takes is the butterfly spring to pop out of the caliper (~2mm) and you end up with a massive score mark around the rim lol.
Posts: 1,441
Threads: 48
Joined: Dec 2011
Reputation:
5
Location: Woodstock, Oxford
Car Model/Spec: Peugeot 306 S16 Cossack
Caliper needs trimming a bit
Peugeot 206 GTI HDI
Volvo V50 2.0d
Volvo XC90 D5
Posts: 71
Threads: 7
Joined: Apr 2015
Reputation:
0
Location: Belfast
Car Model/Spec: Astorgreyhdi
Volcanes are 14s so probably will need to take a bit of the calliper
Posts: 3,539
Threads: 42
Joined: Mar 2012
Reputation:
28
the 15" 16v wheels wont take anything bigger than 266.
