Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
matts xsi euro project
Well I've got the head off poodle so now my rebuild can commence!
[Image: 20A1806D-891D-40FB-BD52-AD519177A607-734...391753.jpg]
TEAM CONROD SHITTING RALLYE!
What are you changing in the rebuil?
[Image: Foxy2.jpg]
Taking the cams and valves etc out, giving the head a skim and a pressure test. Gunna see if the valves are reusable if not new valves, then the obvious cambelt kit to swap. Give the bottom end a clean. I may look onto cams but still unsure at te moment
[Image: 20A1806D-891D-40FB-BD52-AD519177A607-734...391753.jpg]
TEAM CONROD SHITTING RALLYE!
Fair enough! You know you want cams!
[Image: Foxy2.jpg]
I do. But dont know if I CBF with the remapping side of things
[Image: 20A1806D-891D-40FB-BD52-AD519177A607-734...391753.jpg]
TEAM CONROD SHITTING RALLYE!
Um man up and do it!
[Image: Foxy2.jpg]
Tbh mate, for the price of cams and a map you could just get a 6' lump put into it and then have even more power to begin with, plus afaik the 6' ecu is a lot more mappable
[Image: Ty8kl7b.jpg]
Right well alot has changed with this over that last couple I days. Taken 3 days so far. But it's getting there. Needs a few more bits and pieces tidyied up. All will be revealed soon
[Image: 20A1806D-891D-40FB-BD52-AD519177A607-734...391753.jpg]
TEAM CONROD SHITTING RALLYE!
That is not an acceptable update, i wanna see photos ......
[Image: 306oc_zpsf2d249a4.jpg]
transplant surly for the win.
[Image: newsig_zpsee86fa10.jpg]
Fozzy Wrote:That is not an acceptable update, i wanna see photos ......

See the pic on fb! That's the update Wink

Just need door rubbers, a bootlock, and a rubber that runs along the bottom of drivers door and it will look sweeeeeet!
[Image: 20A1806D-891D-40FB-BD52-AD519177A607-734...391753.jpg]
TEAM CONROD SHITTING RALLYE!
Matt Wrote:
Fozzy Wrote:That is not an acceptable update, i wanna see photos ......

See the pic on fb! That's the update Wink

Just need door rubbers, a bootlock, and a rubber that runs along the bottom of drivers door and it will look sweeeeeet!

Looks nice mate, still think you should have done it darker though Tongue
Team Orange Engine Bay

My flickr photostream - http://www.flickr.com/photos/markairey
The paint cost me £12.99 for 750ml tin. Couldn't argue with that. Plus it's Matt so no faffing about with perfections. It was mainly because I was sick of seeing the scratches and scuffs and the black bonnet. Gf said to why not paint it as your off work? So had me and the gf pairing it for the last two days, spent a day sanding.
Just got to smooth the front bumper, and because I can't be arsed with sticking the sidestrips back on I'm going to smooth the sides. It's kinda of a ratty euro thing now Big Grin I have fallen in love with my car again. Just need my spacers to come through, and fit my engine mounts. Maybe a couple of new pullies and fit my cambelt and all will be awesome Big Grin
[Image: 20A1806D-891D-40FB-BD52-AD519177A607-734...391753.jpg]
TEAM CONROD SHITTING RALLYE!
Cough... sexy... cough
[Image: 392440_10150734366725306_702870305_11863...9015_n.jpg]
[Image: IMG_20130925_181339_zps95df48fa.jpg]
^^ thats what I was going to do but figured he wouldn't be amused lol
Team Orange Engine Bay

My flickr photostream - http://www.flickr.com/photos/markairey
Lol well its on facebook so its fair game

That shit will get you killed!
[Image: IMG_20130925_181339_zps95df48fa.jpg]
I'm am not amused!!!!

Nah I stuck it on fb as my photobucket app is dead. Won't upload. Cheers phil for sticking it on in.

I'll get some decent pics up this week
[Image: 20A1806D-891D-40FB-BD52-AD519177A607-734...391753.jpg]
TEAM CONROD SHITTING RALLYE!
[Image: 522914_10150734342530306_702870305_11863...6211_n.jpg]
[Image: IMG_20130925_181339_zps95df48fa.jpg]
[Image: 546323_10150734342955306_702870305_11863...9184_n.jpg]
[Image: IMG_20130925_181339_zps95df48fa.jpg]
So awesome dude. Epic!
[Image: k6f9Fk]


Member of the 99% warning or you're nothing club
da da da da da, im loving it.
[Image: newsig_zpsee86fa10.jpg]
Shit the bed matt! That's awesome Big Grin hats off to you for just manning up and doing it too! Looks amazing from the pics Big Grin

You need to delock your boot now tho Tongue

Also everyone loves a shiny shiny turbo strapped to a minty engine... Low-boost turbo-6 engine isn't toooooo expensive... ninja
'99 Ph3 Diablo Gti(Victor) Dead
Astor 'X' 4 GTi6-6 - SOLD! Sad
'08 LY Renault Megane RS 230 F1 Team R26 - GONE
'56 BMW Z4 Coupe 3.0si Sport - SCHWIIIING!
^^ This boot defo needs to be smoothed now! Looking lurvely now though Smile
[Image: Ty8kl7b.jpg]
Agree with everyone, smooth boot is needed, really easy to do now you don't need to blend to moonstone.
[Image: 306oc_zpsf2d249a4.jpg]
Looks totes awesome buddy
[Image: 547a69bf.jpg]

[Image: 66edcb68.jpg]

[Image: 0dce4198.jpg]

[Image: ac47cbd5.jpg]

Smooth boot is a definate. Along with smooth sides and smooth front bumper.


What's the best way of hooking up the rear to pop with the rear wiper mech? Anyone got a how to?
[Image: 20A1806D-891D-40FB-BD52-AD519177A607-734...391753.jpg]
TEAM CONROD SHITTING RALLYE!
ye thats what i did just get the wires from the wiper and put them to the boot lock then you just have to get a piece of metal on the boot lock and modify it abit so it pops. btw car looks really nice. did you use a spray gun
Venetian XUD ph2 heaven
Ph3 perv cab heaven
Black ph1 XUD died

Moonstone hdi stage 2
Read dum dums smooth boot guide, its in there I think. Its really easy, you just use the central locking motor
306oc Chat Wrote:15:30: Toms306 - :Genuinely thought it was gonna explode when I was playing with Sam
22:57: SRowell - :wtf why didnt you try harder to make me come!
[Image: connorsig.jpg]
That looks like it needs a second coat mate.




Matt Wrote:What's the best way of hooking up the rear to pop with the rear wiper mech? Anyone got a how to?

Ive done a guide in the guides section mate.

You can use your C/L motor in the boot as the popper to save buying one.
karl1989 Wrote:ye thats what i did just get the wires from the wiper and put them to the boot lock then you just have to get a piece of metal on the boot lock and modify it abit so it pops. btw car looks really nice. did you use a spray gun

I used a roller. Rollered the primer on and then then Matt paint. Smile turned out alright Smile


And Conner I'll definatley check out that guide now Smile
[Image: 20A1806D-891D-40FB-BD52-AD519177A607-734...391753.jpg]
TEAM CONROD SHITTING RALLYE!


Possibly Related Threads…
Thread Author Replies Views Last Post
  Matts cheap cherry rallye Matt-Rallye 15 13,980 02-01-2018, 08:45 AM
Last Post: Matt-Rallye
  Matts Cherry HDi Dturbo. Project Stage 1+ & tidy up. Matt-Rallye 29 25,070 10-05-2017, 12:49 PM
Last Post: Poodle
  Matts £200 Cherry Rallye shell rebuild & tidy up project. Xsara goodies landed! Matt-Rallye 70 63,694 07-03-2017, 12:58 PM
Last Post: Matt-Rallye

Forum Jump:


Users browsing this thread: 2 Guest(s)