Login

andyyy · 24-09-2014, 05:56 PM

As above

[Image: IMG_20140923_185740551_zpsfj9zrfoi.jpg]

[Image: IMG_20140923_185749070_zpshsnnh5zb.jpg]

[Image: IMG_20140923_185757417_zpseo2k1xre.jpg]

Also the advance piston had some quite bad scoring and is stiffer than usual I don't have any photos atm tho

Dave · (This post was last modified: 30-09-2014, 09:37 PM by Dave.)

Normal but she's wearing ...

Probs been run on unfiltered fuel at some point

**nominous** · 01-10-2014, 02:11 PM

Second pic looks like pitting ?
Debris ?

**Paul_13** · 01-10-2014, 06:42 PM

Is there any way of draining the pump in position?

andyyy · 08-10-2014, 08:06 AM

(01-10-2014, 02:11 PM)nominous Wrote: Second pic looks like pitting ?
Debris ?

That was my main concern

(30-09-2014, 09:36 PM)Dave Wrote: Normal but she's wearing ...

Probs been run on unfiltered fuel at some point

Yeah pump was ran on unfiltered red (off the road) for a couple of weeks when i first got it , then filtered cooking oil for ages till the seals went

So worth putting back together ?

**nominous** · 07-11-2014, 03:53 PM

Always diffficult to tell from a piccy.
Can you catch it with a nail around where the low pressure vane pump bits move?
Then it's worn.

My limited knowledge, is that if it's worn elsewhere, you should be ok as the rest of it is not requiring a seal.

Dave · 08-11-2014, 10:43 PM

The pump wont fail as such due to that wear, its worth a re-seal. It may have issues with the advance timing in the future

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Piston Wear	306Dan	3	2,024	10-08-2015, 07:44 PM Last Post: craig306
	head gasket time is this normal ????	xudlingo	3	1,840	21-05-2015, 07:53 AM Last Post: r3k1355
	Not your normal bosch pump thread	toseland	16	9,780	15-01-2015, 09:01 AM Last Post: nominous