Bits n bobs left LOOK!! Revised prices!!

[CJ_Derv]

Got some extras I found in garage


Set of rear pads £7.50 posted new but 2 different makes bought a set to replace siezed side and then just found another 2 brand new pair for each side....SOLD

Brembo braided lines used, has slight bit of plastic coating come off



£15 posted

Fuel line and primer £5 posted


Front Bumper mounts 2 pairs £3 posted per set


Blower motor non ac valeo £15 posted
....SOLD

306 M3 mirrors one damaged nees repairing has most bits from damage £10 posted


0g amp cable and 4way splitter £7.50 posted good length for 306 wil measure if required


Shortened gearstick and good condition gaiter £10 posted
....SOLD

Bumper clip and stays lockable £4.50


Phase 2 clusters x 2 1 has 148k other about 115k iirc £12 each



Bonnet lifters didnt get round to spraying £5 posted drilled for 306


Rear leather headrests one looks warped but had been resting against a cardboard box will straighten out in a few mins after me taking it lol £10 posted


Phase 2 stalks x2 both in working order £8 each posted


Rear lights fly eye tinted have full bulb set others dont £12 posted for tinted £10 posted for other lenses


Centre console clock working £10 posted


Single feed washer motor used for 3 months £5 posted


Scuttle panels good condition £10 posted


Catchtank 9mm feeds I think £10 posted
SOLD

Slam panel phase 2/3 £10 collected ...SCRAPPED

Multiple buy discount!!

[CJ_Derv]

And some more

Nearly new tensioner had been used a few months £15 posted



£10 posted

Powersteering and alternator bracket, welded 1/4 socket for easy adjustment
£10 posted


Grille and hockey sticks black could do with respray
£15 posted


Garrett T2 does have some play was working no smoke when on blaze, which got wrote off

£15 posted

Speedo (flywheel) sensor £7.50 posted


Non egr intake manifold £10

[CJ_Derv]

BUMPY BUMPY have dropped prices ON EVERYTHING! obvious is low price postage wont be recorded

[Just Sean]

I'll take the braided hoses pal.

[Sambarker]

Ill take rear pads matey

[Just Sean]

What condition are the hoses in actually. I'm buying as mine have rounded nuts in the caliper end. Don't want the same problem!

[ginge191]

got any hose with the catch tank?

[Piggy]

What condition are the hoses in actually. I'm buying as mine have rounded nuts in the caliper end. Don't want the same problem!

just guna text you to say these were up! lol!

---

what make are the rear pads Cj?

[CJ_Derv]

Other than the plastic coating you can see in the oic nothing pal, they need undoing from the bolt which is attached in wing didnt have time when broke car so just snipped brake line on car

---

Sorry ginge catchtank sold

---

They came out the brembos easily pal threads in good condition caliper side and as mentioned other side still attached

---

Rear pads are 2 pairs of different makes as had a siezed caliper which went through a few sets so bought another and then found one pair of ferodo when clearing garage but theyre all brand new and in pairs so 2 hadlve the locators and 2 plain

[Matt]

Bumper clips £4.50 posted?

[CJ_Derv]

Bumper clips £4.50 posted?

---

Bumper clips £4.50 posted?

For standard 1st class yes pal

[the milkman]

Cj t2 how much collected mate?

[CJ_Derv]

£10 ash but as said has play but ran fine before the crash

[the milkman]

Alot of play or reckon may get away with it?

[CJ_Derv]

Nip down sometime n see hard for me to gauge can only just fit sausage fingers in lol

[the milkman]

Okay I'll bring my little bitch fingers down this weekend maybe?

[CJ_Derv]

---

There the ends of braided lines btw

[CJ_Derv]

306 cyclone flat nut lockers £12 posted

[Teddy]

still got lines lad ?

[nick000]

Dont suppose the headlamp trims are ph1?

[CJ_Derv]

still got lines lad ?

Sorry only just seen this buddy yea I have

---

Dont suppose the headlamp trims are ph1?

No sorry phase 2/3

[RetroPug]

PM sent

[Matt]

Still got bumper clips and raisers? If so ill take

[9Freedman9]

Black mirror caps and drivers side wing moulding? Under the side repeater? Posted? Ta

[CJ_Derv]

Still got bumper clips and raisers? If so ill take

Pretty sure I have buddy il pop garage this week and check for ya

---

Black mirror caps and drivers side wing moulding? Under the side repeater? Posted? Ta

Dont have them bits pal

---

Will have a check in garage this week and see what other parts I may have left and ammend thread as need everything gone now

Ive still a brand new stainless 2.5" tight 90 elbow I was going to use to re-route hose on td04 £12 posted if anyone wants it

[Teddy]

I will take rear pads lad if u still have them
Pme cheers

[CJ_Derv]

Rear pads have gone stil got lines tho pal

[Jimbo]

Ill take that elbow when I pay for the dash cluster as per pm
Cheers bud