306oc - Peugeot 306 Owners Club & Forum
Bits n bobs left LOOK!! Revised prices!! - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Parts (https://www.306oc.co.uk/forum/forumdisplay.php?fid=25)
+--- Thread: Bits n bobs left LOOK!! Revised prices!! (/showthread.php?tid=16292)



Bits n bobs left LOOK!! Revised prices!! - CJ_Derv - 08-08-2013

Got some extras I found in garage

[Image: 20130808_183728.jpg]
Set of rear pads £7.50 posted new but 2 different makes bought a set to replace siezed side and then just found another 2 brand new pair for each side....SOLD

Brembo braided lines used, has slight bit of plastic coating come off
[Image: 20130808_183508.jpg]

[Image: 20130808_183513.jpg]
£15 posted

Fuel line and primer £5 posted
[Image: 20130808_183602.jpg]

Front Bumper mounts 2 pairs £3 posted per set
[Image: 20130808_183526.jpg]

Blower motor non ac valeo £15 posted
[Image: 20130808_182553.jpg]....SOLD

306 M3 mirrors one damaged nees repairing has most bits from damage £10 posted
[Image: 20130808_182648.jpg]

0g amp cable and 4way splitter £7.50 posted good length for 306 wil measure if required
[Image: 20130808_182842.jpg]

Shortened gearstick and good condition gaiter £10 posted
[Image: 20130808_182548.jpg]....SOLD

Bumper clip and stays lockable £4.50
[Image: 20130808_181940.jpg]

Phase 2 clusters x 2 1 has 148k other about 115k iirc £12 each
[Image: 20130808_182853.jpg]


Bonnet lifters didnt get round to spraying £5 posted drilled for 306
[Image: 20130808_182951.jpg]

Rear leather headrests one looks warped but had been resting against a cardboard box will straighten out in a few mins after me taking it lol £10 posted
[Image: 20130808_182957.jpg]

Phase 2 stalks x2 both in working order £8 each posted
[Image: 20130808_182847.jpg]

Rear lights fly eye tinted have full bulb set others dont £12 posted for tinted £10 posted for other lenses
[Image: 20130808_181448.jpg]

Centre console clock working £10 posted
[Image: 20130808_181317.jpg]

Single feed washer motor used for 3 months £5 posted
[Image: 20130808_182700.jpg]

Scuttle panels good condition £10 posted
[Image: 20130808_182713.jpg]

Catchtank 9mm feeds I think £10 posted
[Image: 20130808_181111.jpg] SOLD

Slam panel phase 2/3 £10 collected ...SCRAPPED

Multiple buy discount!!


Re: Bits n bobs left LOOK!! Revised prices!! - CJ_Derv - 09-08-2013

And some more

Nearly new tensioner had been used a few months £15 posted
[Image: 20130808_180920.jpg]

[Image: 20130808_180913.jpg]
£10 posted

Powersteering and alternator bracket, welded 1/4 socket for easy adjustment
£10 posted
[Image: 20130808_180924.jpg]

Grille and hockey sticks black could do with respray
£15 posted
[Image: 20130808_180933.jpg]

Garrett T2 does have some play was working no smoke when on blaze, which got wrote off
[Image: 20130808_180941.jpg]
£15 posted

Speedo (flywheel) sensor £7.50 posted
[Image: 20130808_180952.jpg]

Non egr intake manifold £10
[Image: 20130808_181025.jpg]


Re: Bits n bobs left LOOK!! Revised prices!! - CJ_Derv - 27-08-2013

BUMPY BUMPY have dropped prices ON EVERYTHING! obvious is low price postage wont be recorded


RE: Bits n bobs left LOOK!! Revised prices!! - Just Sean - 27-08-2013

I'll take the braided hoses pal.


Bits n bobs left LOOK!! Revised prices!! - Sambarker - 27-08-2013

Ill take rear pads matey


RE: Bits n bobs left LOOK!! Revised prices!! - Just Sean - 27-08-2013

What condition are the hoses in actually. I'm buying as mine have rounded nuts in the caliper end. Don't want the same problem!


RE: Bits n bobs left LOOK!! Revised prices!! - ginge191 - 27-08-2013

got any hose with the catch tank?


RE: Bits n bobs left LOOK!! Revised prices!! - Piggy - 27-08-2013

(27-08-2013, 10:30 AM)Just Sean Wrote: What condition are the hoses in actually. I'm buying as mine have rounded nuts in the caliper end. Don't want the same problem!

just guna text you to say these were up! lol!

what make are the rear pads Cj?


Re: Bits n bobs left LOOK!! Revised prices!! - CJ_Derv - 27-08-2013

Other than the plastic coating you can see in the oic nothing pal, they need undoing from the bolt which is attached in wing didnt have time when broke car so just snipped brake line on car

Sorry ginge catchtank sold

They came out the brembos easily pal threads in good condition caliper side and as mentioned other side still attached

Rear pads are 2 pairs of different makes as had a siezed caliper which went through a few sets so bought another and then found one pair of ferodo when clearing garage but theyre all brand new and in pairs so 2 hadlve the locators and 2 plain


RE: Bits n bobs left LOOK!! Revised prices!! - Matt - 27-08-2013

Bumper clips £4.50 posted?


Re: RE: Bits n bobs left LOOK!! Revised prices!! - CJ_Derv - 27-08-2013

(27-08-2013, 01:52 PM)Matt Wrote: Bumper clips £4.50 posted?

(27-08-2013, 01:52 PM)Matt Wrote: Bumper clips £4.50 posted?

For standard 1st class yes pal


RE: Bits n bobs left LOOK!! Revised prices!! - the milkman - 27-08-2013

Cj t2 how much collected mate?


Re: Bits n bobs left LOOK!! Revised prices!! - CJ_Derv - 27-08-2013

£10 ash but as said has play but ran fine before the crash


RE: Bits n bobs left LOOK!! Revised prices!! - the milkman - 27-08-2013

Alot of play or reckon may get away with it?


Re: Bits n bobs left LOOK!! Revised prices!! - CJ_Derv - 27-08-2013

Nip down sometime n see hard for me to gauge can only just fit sausage fingers in lol


RE: Bits n bobs left LOOK!! Revised prices!! - the milkman - 27-08-2013

Okay I'll bring my little bitch fingers down this weekend maybe?


Re: Bits n bobs left LOOK!! Revised prices!! - CJ_Derv - 29-08-2013

[Image: 20130827_182806_zpsb4d2966c.jpg]

[Image: 20130827_182824_zpsd334a6a9.jpg]

There the ends of braided lines btw


Re: Bits n bobs left LOOK!! Revised prices!! - CJ_Derv - 06-09-2013

[Image: 20130526_153124.jpg]

306 cyclone flat nut lockers £12 posted


RE: Bits n bobs left LOOK!! Revised prices!! - Teddy - 07-12-2013

still got lines lad ?


RE: Bits n bobs left LOOK!! Revised prices!! - nick000 - 11-12-2013

Dont suppose the headlamp trims are ph1?


Re: RE: Bits n bobs left LOOK!! Revised prices!! - CJ_Derv - 13-01-2014

(07-12-2013, 11:38 PM)Teddy Wrote: still got lines lad ?

Sorry only just seen this buddy yea I have

(11-12-2013, 01:14 PM)nick000 Wrote: Dont suppose the headlamp trims are ph1?

No sorry phase 2/3


RE: Bits n bobs left LOOK!! Revised prices!! - RetroPug - 13-01-2014

PM sent


RE: Bits n bobs left LOOK!! Revised prices!! - Matt - 13-01-2014

Still got bumper clips and raisers? If so ill take


RE: Bits n bobs left LOOK!! Revised prices!! - 9Freedman9 - 13-01-2014

Black mirror caps and drivers side wing moulding? Under the side repeater? Posted? Ta


Re: RE: Bits n bobs left LOOK!! Revised prices!! - CJ_Derv - 13-01-2014

(13-01-2014, 06:32 PM)Matt Wrote: Still got bumper clips and raisers? If so ill take

Pretty sure I have buddy il pop garage this week and check for ya

(13-01-2014, 07:39 PM)9Freedman9 Wrote: Black mirror caps and drivers side wing moulding? Under the side repeater? Posted? Ta

Dont have them bits pal

Will have a check in garage this week and see what other parts I may have left and ammend thread as need everything gone now

Ive still a brand new stainless 2.5" tight 90 elbow I was going to use to re-route hose on td04 £12 posted if anyone wants it


RE: Bits n bobs left LOOK!! Revised prices!! - Teddy - 13-01-2014

I will take rear pads lad if u still have them
Pme cheers


RE: Bits n bobs left LOOK!! Revised prices!! - CJ_Derv - 13-01-2014

Rear pads have gone stil got lines tho pal


RE: Bits n bobs left LOOK!! Revised prices!! - Jimbo - 13-01-2014

Ill take that elbow when I pay for the dash cluster as per pm
Cheers bud