Posts: 1,756
Threads: 79
Joined: Jun 2012
Reputation:
17
Location: Stroud, Gloucestershire
Car Model/Spec: Down and out HDi racestate
18-05-2013, 07:43 PM
Sorry for another clutch thread, ive looked through the others and im only after a couple of details.
1: the part number for the uprated sachs friction plate, paddle one i believe.
2: is it definitely available from ECP?
3: will it work with a standard LUK pressure plate and bearing?
Thanks
Ian
Posts: 4,660
Threads: 343
Joined: Jul 2012
Reputation:
15
Location: Chesterfield
Car Model/Spec: 106 gti / 306 hdi estate
19-05-2013, 03:03 PM
(This post was last modified: 19-05-2013, 03:04 PM by Chris_90.)
Dont no the part number but its on .net if you look on the clutch thred EDIT here it is 881861 999857
Can be bought from ecp well i ordered mine from there they got it in for me but never ened getting it due to changeing my mind and selling car.
I would use a valeo pressure plate and bearing as its tryed and tested to work not sure on the luk might work ok but dont no any one that has tried it
Posts: 1,756
Threads: 79
Joined: Jun 2012
Reputation:
17
Location: Stroud, Gloucestershire
Car Model/Spec: Down and out HDi racestate
Awesome, thanks bud. As far as i know the valeo and LUK are the same, some have even had valeo labeled stuff in LUK boxes, so that should be fine.
Posts: 10,864
Threads: 117
Joined: Dec 2011
Reputation:
119
Location: Southampton
Car Model/Spec: 306 HDi and friends
Chris, i thought you went for the citroen berlingo clutch?
![[Image: sig002_zpscb892e18.jpg]](http://i205.photobucket.com/albums/bb46/Silent_Rider-TP/car/sig002_zpscb892e18.jpg)
