Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Sticky Stat?
#1
Was just wondering if I'm on the right lines

Engine temp can hit 90-95 pretty quickly but then rapidly falls to 80~ then rises to where it usually sits just shy of 90

Hit and miss but most of the time blows cold air

Engine fans come on at around the right time usually but has also came on when the temp is around 80

Odd one just wondering if anyone could shine a light on the subject
[Image: IMG_20130925_181339_zps95df48fa.jpg]
#2
Small air lock?
GT2052s DTurbo
OEM+ HDI Estate
Project thread
#3
You reckon? I'm yet to look tbh but what's the best way of getting that sorted? Just re bleed the system?
[Image: IMG_20130925_181339_zps95df48fa.jpg]
#4
Yea re bleed it.
#5
yeah sticky stat i reckon mate, mine does exactly the same, i just haven't bothered changing it, i'm convinced that's what it is though . .Smile
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
#6
I've got the same issue - I'm pretty sure it's the stat that usually causes it.
(16-05-2016, 10:45 AM)Toms306 Wrote: Oh I don't care about the stripped threads lol, that's easily solved by hammering the bolt in. Wink
Nanstone GTD5 GT17S - XUD9TE
Volvo V50 D5 R-Design SE Sport - Daily cruise wagon.
#7
Shall get a new one fitted Friday and report back with findings :-)
[Image: IMG_20130925_181339_zps95df48fa.jpg]
#8
~£20 from Peugeot, got one last week then 90p for the seal.
#9
(07-05-2013, 07:00 PM)bigcheez2k3 Wrote: ~£20 from Peugeot, got one last week then 90p for the seal.

Or about £4 from Euro car parts Wink



#10
(07-05-2013, 07:20 PM)Chris_90 Wrote:
(07-05-2013, 07:00 PM)bigcheez2k3 Wrote: ~£20 from Peugeot, got one last week then 90p for the seal.

Or about £4 from Euro car parts Wink

Dealer quality.
#11
(07-05-2013, 07:43 PM)bigcheez2k3 Wrote:
(07-05-2013, 07:20 PM)Chris_90 Wrote:
(07-05-2013, 07:00 PM)bigcheez2k3 Wrote: ~£20 from Peugeot, got one last week then 90p for the seal.

Or about £4 from Euro car parts Wink

Dealer quality.

^^This. I bought a motorfactor stat and it sits bang on 83degrees when running, but initially reaches about 88-90 before coming back down. My coolant system's full of Wondarweld shite though so that's maybe blocked it.
[Image: signature_zps1a02ba79.jpg]
#12
Just to revive for confirmation if anyone finds this in a years time

It was a sticky thermostat.

The old one wouldn't open in boiling water


New one in. Jobs a good un
[Image: IMG_20130925_181339_zps95df48fa.jpg]
#13
So no more running at 90c?
#14
Nooope. Coolant fans haven't come on and sits just above 80 :-)
[Image: IMG_20130925_181339_zps95df48fa.jpg]


Possibly Related Threads…
Thread Author Replies Views Last Post
  Sticky clutch and Accelarator davalav 6 3,960 29-11-2012, 01:07 PM
Last Post: davalav
  Sticky residue in Bosch LDA Kwik 9 4,996 26-10-2012, 09:15 AM
Last Post: Kwik

Forum Jump:


Users browsing this thread: 1 Guest(s)