04-11-2012, 05:22 PM
(This post was last modified: 04-11-2012, 05:33 PM by cwspellowe.)
Fellas, need to raise funds as my turbo ain't gonna fit itself.
GTI6 torsion bars, 20mm, splines always well greased and have been in and out the refurbed beam plenty of times with no trouble at all.
£45 posted
GTI6 283mm Eicher brake discs, never used, bought but fitted 302mm's instead.
£22 posted.
GTI6 front brake calipers & hoses. One needs a refurb as it was binding. Just needs a new slide pin, piston is ok, about £8 from Bigg Red but cba with them.
£30 posted.
Valeo graphite grey masks. Done for a member of theywhoshallnotbenamed a couple of weeks ago but dropped one so it only has one mounting clip left intact. Will still mount solidly but you'll need to be creative with cable ties. I'm picking up another set for him so these can go cheap.
£40 posted.
Brand new 68-73mm Mikalor style clamps. Have many many sizes but notably 15 x 68-73mm stainless clamps, the ones from AP motorstore. Bought in error as they were the wrong size I needed. They're currently £2.95 each inc P&P from eBay, so that's near as makes no difference £45 posted for 15.
I'll take £30 posted for them.
M12x1.25 stud and nut conversion. 8x80mm studs, 8x100mm studs, 16xnuts. Fit all Peugeots, ideal if you're running spacers but would be too long for standard wheels.
£25 posted
2x 20mm hubcentric spacers, 65.1mm centre bore inside and outside, 4x108 stud pattern
£30 posted for the pair
Open to offers on the lot, need the dollah.
GTI6 torsion bars, 20mm, splines always well greased and have been in and out the refurbed beam plenty of times with no trouble at all.
£45 posted
GTI6 283mm Eicher brake discs, never used, bought but fitted 302mm's instead.
£22 posted.
GTI6 front brake calipers & hoses. One needs a refurb as it was binding. Just needs a new slide pin, piston is ok, about £8 from Bigg Red but cba with them.
£30 posted.
Valeo graphite grey masks. Done for a member of theywhoshallnotbenamed a couple of weeks ago but dropped one so it only has one mounting clip left intact. Will still mount solidly but you'll need to be creative with cable ties. I'm picking up another set for him so these can go cheap.
£40 posted.
Brand new 68-73mm Mikalor style clamps. Have many many sizes but notably 15 x 68-73mm stainless clamps, the ones from AP motorstore. Bought in error as they were the wrong size I needed. They're currently £2.95 each inc P&P from eBay, so that's near as makes no difference £45 posted for 15.
I'll take £30 posted for them.
M12x1.25 stud and nut conversion. 8x80mm studs, 8x100mm studs, 16xnuts. Fit all Peugeots, ideal if you're running spacers but would be too long for standard wheels.
£25 posted
2x 20mm hubcentric spacers, 65.1mm centre bore inside and outside, 4x108 stud pattern
£30 posted for the pair
Open to offers on the lot, need the dollah.
![[Image: signature_zps1a02ba79.jpg]](http://s1128.photobucket.com/user/martypellowe/media/signature_zps1a02ba79.jpg.html)
![[Image: Untitled-1_zpsc57da38e.jpg]](http://s112.photobucket.com/user/w1n_2006/media/Untitled-1_zpsc57da38e.jpg.html)
![[Image: DSCF2413.jpg]](http://i1128.photobucket.com/albums/m481/martypellowe/Masks/DSCF2413.jpg)
![[Image: Cn91r40h.jpg]](http://i.imgur.com/Cn91r40h.jpg)
