25-05-2015, 09:48 AM
How do you go about fitting one? And taking out the airbag too
Top glove box
|
25-05-2015, 09:48 AM
How do you go about fitting one? And taking out the airbag too
25-05-2015, 10:24 AM
disconnect battery. remove lower glove box which is held in by two pics. undo the two bolts holding the air bag. insert resistor. insert new glove box screw in. job done.
On a break from 306oc for personal reasons. If anyone needs or wants me most of you have my number and or facebook messenger
Thanks for the good times guys n gals. I might be back. Who knows.
25-05-2015, 10:51 AM
Easier to pop the stereo out to get the airbag out imo, lower glovebox is a right pain!
25-05-2015, 10:52 AM
Fair enough. Either of them. Just get to bolts underneath
On a break from 306oc for personal reasons. If anyone needs or wants me most of you have my number and or facebook messenger
Thanks for the good times guys n gals. I might be back. Who knows.
25-05-2015, 11:34 AM
What you need is an ear cos if you add 'ear' to top glove box' you get 'Top Gear love box'
I thought the air bag was riveted in? Disconnect battery, prise cover off air bag, unplug, drill the rivets, remove airbag, fit clips that take the screws screw top air bag in
25-05-2015, 11:38 AM
(25-05-2015, 11:34 AM)Dum-Dum Wrote: What you need is an ear cos if you add 'ear' to top glove box' you get 'Top Gear love box' ![]() ![]()
25-05-2015, 11:45 AM
Its on a sprung pin I think, remove stereo and you can remove the pin from there, then it just lifts out, its only rivetted to a cage thing. Unless that was the Golf? Making me doubt myself now lol.
![]()
25-05-2015, 11:52 AM
I was also wondering about this, I had a go at mine the other day but decided I couldn't really be arsed
![]()
#2 Moonstone Blue HDI
![]()
25-05-2015, 01:26 PM
I'd rather have an airbag than a few extra cubic inches of storage lol
25-05-2015, 02:09 PM
Weight saving.
Pointless only having a passenger air bag when I don't have any others.
#2 Moonstone Blue HDI
![]()
25-05-2015, 02:50 PM
Right. Ive actually done this recently. So ive written a guide for you...
http://306oc.co.uk/forum/showthread.php?tid=30591
Thanks I'll be doing it soon then!!
25-05-2015, 06:05 PM
It's through the stereo to remove it, loosen a nut off then pull a spring loaded bar and airbag just comes out, did it on one a while back
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
|
« Next Oldest | Next Newest »
|