Fitting new P bush

[Welshy_Pete]

I have removed the lower arm and removed the old P bush as well. But I'm just wandering whats the best way to get the new P bush in the right position to go back in right.

I know the right way around it goes in but getting the angle or amount of turn right is the main problem.

Thanks

[mcglynn]

you just put it straight, or angle it a little. get a look at the wishbones with the wheel on the ground and see what level its at, then set your p bush to this level.

eg. if your car is lowered you would angle it more, its pretty simple.