+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Suspension, Transmission, Handling & Braking (https://www.306oc.co.uk/forum/forumdisplay.php?fid=19)
+--- Thread: Fitting new P bush (/showthread.php?tid=20757)
Fitting new P bush - Welshy_Pete - 24-01-2014
I have removed the lower arm and removed the old P bush as well. But I'm just wandering whats the best way to get the new P bush in the right position to go back in right.
I know the right way around it goes in but getting the angle or amount of turn right is the main problem.
Thanks
RE: Fitting new P bush - mcglynn - 27-01-2014
you just put it straight, or angle it a little. get a look at the wishbones with the wheel on the ground and see what level its at, then set your p bush to this level.
eg. if your car is lowered you would angle it more, its pretty simple.