Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Decat for Citroen ZX 1.9TD
#1
Hello, 
does anyone know if the 306 decat pipe can be used on the Citroen zx?
i know the cars are very similar in design but are the exhaust the same? 
thanks
#2
Some will know more than me however, I do know the exhaust differs between zx and 306 not sure on the downpipe though Smile
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
#3
Hello,

No its different. However I have a lovely turbo to backbox exhaust system in my garage if you're interested?
Peugeot 206 GTI HDI
Volvo V50 2.0d
Volvo XC90 D5







#4
(05-05-2015, 07:10 AM)Anton Wrote: Hello,

No its different. However I have a lovely turbo to backbox exhaust system in my garage if you're interested?

Hmm hadn't thought about doing the whole exhaust but go on Smile
Got any pictures? And how does it sound?
#5
trouble with the earlier non cat system is that its only a two piece system not three piece like the cat cars, the only part which is the same as a 306 is the cat, from the cat bsck under the tank to the tailpipe is different.

no hanger on the middle box, bends under the tank different enough for the 306 system to hit the tank, and the rear hangers sit at 90 degrees to the 306.
need a part number? http://public.servicebox.peugeot.com/ and http://service.citroen.com/ will sort you out.
#6
(05-05-2015, 11:29 AM)kee616 Wrote:
(05-05-2015, 07:10 AM)Anton Wrote: Hello,

No its different. However I have a lovely turbo to backbox exhaust system in my garage if you're interested?

Hmm hadn't thought about doing the whole exhaust but go on Smile
Got any pictures? And how does it sound?

I haven't got any pictures but it looks like an exhaust haha. Its not very old, I had the midbox removed and a straight pipe welded in its place. Its got a standard backbox attached too if you wanted that as well. I can get pics if you like. 07842257681
Peugeot 206 GTI HDI
Volvo V50 2.0d
Volvo XC90 D5







#7
Okay mate messaged you Smile
#8
(05-05-2015, 11:42 AM)welshpug Wrote: trouble with the earlier non cat system is that its only a two piece system not three piece like the cat cars, the only part which is the same as a 306 is the cat, from the cat bsck under the tank to the tailpipe is different.

no hanger on the middle box, bends under the tank different enough for the 306 system to hit the tank, and the rear hangers sit at 90 degrees to the 306.

So I have the cat system so the 3 piece I take it the downpipe from the turbo and cat are the same piece 
What's the part I need for the non cat system 
#9
PG483L is this the Part number I need for the down pipe?
Thanks


Forum Jump:


Users browsing this thread: 1 Guest(s)