Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Matts Td5 disco daily workhorse. Modifications & maintenance ahoy!
#31
Update..

Passed MOT today with flying colours Smile Tester noted it was incredibly clean on top and emissions wise but chassis is covered in surface rust so i will have to step forward my plans to strip and paint the chassis before we find ourselves in winter!

Very very pleased though Big Grin
[Image: 17b33c2a-8471-4313-992e-0a4b324cf926_zps2e63812a.jpg]
Team Cyril
#32
Are you going to treat the inside of the chassis too?
#33
With the current discussion in the chatbox i thought i should update this!

Have put 3.5k miles on this since purchase and its currently my only vehicle on the road Smile using it to tow and carry heavy loads aswell as commuting 30+ miles a day.

Have replaced the waterpump (was leaking when i bought the truck) not to bad a job!

Only mods i have done is a decat and EGR blanking kit and it has been completely reliable so far. Very happy with it! Big Grin Have put some decent all terrain tyres on it that i had lying around which have really made a difference both on the road and off the tarmac Smile

Mods im planning are a front upper light bar with 4x spotlights (already purchased just need to drill the gutter rails and get the relay to wire it in the full beam) and fit a snorkel before i get it mapped.
[Image: 17b33c2a-8471-4313-992e-0a4b324cf926_zps2e63812a.jpg]
Team Cyril
#34
Many roves have been done
Current stable
'09 Mercedes E320cdi wagon 
'99 306 gti6
#35
I can't decide whether to try one of these! Good work Matt.
#36
(08-11-2016, 09:20 PM)1616six Wrote: I can't decide whether to try one of these! Good work Matt.

Doesnt hurt to try one out
[Image: 17b33c2a-8471-4313-992e-0a4b324cf926_zps2e63812a.jpg]
Team Cyril
#37
(08-11-2016, 09:31 PM)Matt-Rallye Wrote:
(08-11-2016, 09:20 PM)1616six Wrote: I can't decide whether to try one of these! Good work Matt.

Doesnt hurt to try one out

I've heard people say the same about bumsex Rofl
#38
(13-11-2016, 08:10 PM)Dum-Dum Wrote:
(08-11-2016, 09:31 PM)Matt-Rallye Wrote:
(08-11-2016, 09:20 PM)1616six Wrote: I can't decide whether to try one of these! Good work Matt.

Doesnt hurt to try one out

I've heard people say the same about bumsex  Rofl

Did it hurt? Wink
#39
(13-11-2016, 08:14 PM)1616six Wrote:
(13-11-2016, 08:10 PM)Dum-Dum Wrote:
(08-11-2016, 09:31 PM)Matt-Rallye Wrote:
(08-11-2016, 09:20 PM)1616six Wrote: I can't decide whether to try one of these! Good work Matt.

Doesnt hurt to try one out

I've heard people say the same about bumsex  Rofl

Did it hurt? Wink

Chris is always butthurt lmao
[Image: 17b33c2a-8471-4313-992e-0a4b324cf926_zps2e63812a.jpg]
Team Cyril
#40
Feel like i should update this somewhat!

Been reliable as sin and covered 10k miles in it now since purchase last autumn. Only major jobs i have had to do is front axle upper & lower balljoints and replace the fuel pressure regulator as it was leaking diesel (been like it since i bought it and my god hasnt it improved the fuel economy now!)

Only jobs left to do now is to replace the intercooler as its bowed and leaking (replacement purchased for £30) and to replace the watts linkage bushes under the back end as its started knocking over rough terrain recently. Smile

Things i have done since this was last updated!

Fitted a snorkel and a much nicer set of alloys i had been after for a while, managed to pick them up cheap with a nearly brand new set of insa turbo dakar mud terrain tyres

[Image: IMG_1023_zpsr2rinrzr.jpg]

[Image: IMG_1164_zpsgcy8wxum.jpg]

Finally took the plunge and fitted my tubular steel winch bumper, mostly because I have also purchased a 5.5t winch to mount in it.

[Image: IMG_1303_zpshy0w3quh.jpg]

[Image: IMG_1306_zpspykxv50q.jpg]

Need to have a slightly smaller plate made so it can be mounted on the bumper neatly rather than cable tied to the grill, also need to retro fit a mk1 discovery washer bottle in the engine bay to get rid of the standard d2 one hanging out below the bumper. Although checking the screenwash level has never been easier lol

It has been used for some greenlaning and has proved incredibly versatile! I lead a party of fellow local landy enthusiasts around some good local greenlanes one sunday and even encountered some snow!

[Image: IMG_1628_zpsbjkggghy.jpg]

[Image: IMG_1615_zpstjvfe3ys.jpg]

[Image: IMG_1616_zpscttistbr.jpg]

And recently i have swapped the standard horn that was full of muddy brown water for a hella sharptone, great difference!

[Image: IMG_1860_zpsn3bhukmr.jpg]

And lastly i finally fitted my spotlight bar & CB aerial mount, Have since purchased a 42 inch LED bar to mount instead of the rusty old spotlights.

[Image: IMG_1749_zpsnzzku0oa.jpg]

few more updates to come soon i expect, have booked my trailer test for end of this month and am saving for an Ifor williams so i can then tow the cars to trackdays etc etc Smile
[Image: 17b33c2a-8471-4313-992e-0a4b324cf926_zps2e63812a.jpg]
Team Cyril
#41
how much is a trailer test these days? Also need to do one really :/
#42
(16-03-2017, 10:38 AM)Eeyore Wrote: how much is a trailer test these days? Also need to do one really :/

Got mine for £350 with a local chap and using my own truck Smile
[Image: 17b33c2a-8471-4313-992e-0a4b324cf926_zps2e63812a.jpg]
Team Cyril
#43
(16-03-2017, 10:50 AM)Matt-Rallye Wrote:
(16-03-2017, 10:38 AM)Eeyore Wrote: how much is a trailer test these days? Also need to do one really :/

Got mine for £350 with a local chap and using my own truck Smile

sounds like a good price. Just for the test with no lessons? My mate had a few lessons before doing his test.
#44
2 q's,
1, how about knocking up a mounting plate for the reg big enough to hide the washer bottle.
2, can you shed more on cb? like a good starter rig to begin with.
It goes, it stops (as reqd). Makeup
Hate Housework!
#45
(16-03-2017, 12:33 PM)Eeyore Wrote:
(16-03-2017, 10:50 AM)Matt-Rallye Wrote:
(16-03-2017, 10:38 AM)Eeyore Wrote: how much is a trailer test these days? Also need to do one really :/

Got mine for £350 with a local chap and using my own truck Smile

sounds like a good price. Just for the test with no lessons? My mate had a few lessons before doing his test.

No lessons needed for me Wink

(16-03-2017, 05:23 PM)Magenta Sunset Wrote: 2 q's,
1, how about knocking up a mounting plate for the reg big enough to hide the washer bottle.
2, can you shed more on cb? like a good starter rig to begin with.

2 a's
1, The washer bottle is now too exposed on the front end, if i knock it off roading its gonna be hassle so its better to just relocate it.
2, Certainly! I use a popular & decent Midland 98 unit & mic and a roof mounted 3ft springer aerial. Hasnt got much range on it but it does what i need it too Smile

http://www.ebay.co.uk/itm/Midland-98-UK-...SwzgBYysoY
[Image: 17b33c2a-8471-4313-992e-0a4b324cf926_zps2e63812a.jpg]
Team Cyril
#46
(17-03-2017, 08:09 AM)Matt-Rallye Wrote:
(16-03-2017, 12:33 PM)Eeyore Wrote:
(16-03-2017, 10:50 AM)Matt-Rallye Wrote:
(16-03-2017, 10:38 AM)Eeyore Wrote: how much is a trailer test these days? Also need to do one really :/

Got mine for £350 with a local chap and using my own truck Smile

sounds like a good price. Just for the test with no lessons? My mate had a few lessons before doing his test.

No lessons needed for me Wink

(16-03-2017, 05:23 PM)Magenta Sunset Wrote: 2 q's,
1, how about knocking up a mounting plate for the reg big enough to hide the washer bottle.
2, can you shed more on cb? like a good starter rig to begin with.

2 a's
1, The washer bottle is now too exposed on the front end, if i knock it off roading its gonna be hassle so its better to just relocate it.
2, Certainly! I use a popular & decent Midland 98 unit & mic and a roof mounted 3ft springer aerial. Hasnt got much range on it but it does what i need it too Smile

http://www.ebay.co.uk/itm/Midland-98-UK-...SwzgBYysoY

many thanks
looks small enough to put in the cubby by the gearstick. Smile
It goes, it stops (as reqd). Makeup
Hate Housework!
#47
(17-03-2017, 04:45 PM)Magenta Sunset Wrote:
(17-03-2017, 08:09 AM)Matt-Rallye Wrote:
(16-03-2017, 12:33 PM)Eeyore Wrote:
(16-03-2017, 10:50 AM)Matt-Rallye Wrote:
(16-03-2017, 10:38 AM)Eeyore Wrote: how much is a trailer test these days? Also need to do one really :/

Got mine for £350 with a local chap and using my own truck Smile

sounds like a good price. Just for the test with no lessons? My mate had a few lessons before doing his test.

No lessons needed for me Wink

(16-03-2017, 05:23 PM)Magenta Sunset Wrote: 2 q's,
1, how about knocking up a mounting plate for the reg big enough to hide the washer bottle.
2, can you shed more on cb? like a good starter rig to begin with.

2 a's
1, The washer bottle is now too exposed on the front end, if i knock it off roading its gonna be hassle so its better to just relocate it.
2, Certainly! I use a popular & decent Midland 98 unit & mic and a roof mounted 3ft springer aerial. Hasnt got much range on it but it does what i need it too Smile

http://www.ebay.co.uk/itm/Midland-98-UK-...SwzgBYysoY

many thanks
looks small enough to put in the cubby by the gearstick. Smile

Yes i have had several 306's with a mag mount aerial up top and cb mounted either in the cubby hole or screwed to the side of the center console lol
[Image: 17b33c2a-8471-4313-992e-0a4b324cf926_zps2e63812a.jpg]
Team Cyril
#48
(18-03-2017, 08:29 AM)Matt-Rallye Wrote:
(17-03-2017, 04:45 PM)Magenta Sunset Wrote:
(17-03-2017, 08:09 AM)Matt-Rallye Wrote:
(16-03-2017, 12:33 PM)Eeyore Wrote:
(16-03-2017, 10:50 AM)Matt-Rallye Wrote: Got mine for £350 with a local chap and using my own truck Smile

sounds like a good price. Just for the test with no lessons? My mate had a few lessons before doing his test.

No lessons needed for me Wink

(16-03-2017, 05:23 PM)Magenta Sunset Wrote: 2 q's,
1, how about knocking up a mounting plate for the reg big enough to hide the washer bottle.
2, can you shed more on cb? like a good starter rig to begin with.

2 a's
1, The washer bottle is now too exposed on the front end, if i knock it off roading its gonna be hassle so its better to just relocate it.
2, Certainly! I use a popular & decent Midland 98 unit & mic and a roof mounted 3ft springer aerial. Hasnt got much range on it but it does what i need it too Smile

http://www.ebay.co.uk/itm/Midland-98-UK-...SwzgBYysoY

many thanks
looks small enough to put in the cubby by the gearstick. Smile

Yes i have had several 306's with a mag mount aerial up top and cb mounted either in the cubby hole or screwed to the side of the center console lol

interesting to know. could be useful to eavesdrop traffic chatter on the way to the coast come holiday time.

I saw on some shop sites your particular rig is discontinued. so what about the '48 or '78?
It goes, it stops (as reqd). Makeup
Hate Housework!
#49
Got a few more bits done on this!

Fitted the light bar, holy jesus its bright!

[Image: IMG_2279_zpsps2efc8y.jpg]

[Image: IMG_2280_zpsqy9trrjp.jpg]

[Image: IMG_2281_zps62trneg7.jpg]

Also got round to replacing the rear bumper i smashed months ago.

[Image: IMG_2425_zpsssdkejno.jpg]

After all that i gave it a scrub and a hoover out inside reasdy to take my trailer test yesterday...

[Image: IMG_2514_zpsdcoaknlz.jpg]

Which i passed Smile Happy days!

[Image: IMG_2516_zpsk3aul8xq.jpg]
[Image: 17b33c2a-8471-4313-992e-0a4b324cf926_zps2e63812a.jpg]
Team Cyril
#50
Well done on the test Matt.
That light bar is awesome.

I'm off to eBay to find me one of them.
                                             [Image: 2ljm03k.jpg]


                                                                                      I Don't Have A 306.
#51
http://www.ebay.co.uk/itm/42INCH-240W-LE...Sw4A5YnSpQ

Cheers buddy Smile one thing i will say about the light bar is dont mount it too close to the roof, i made that mistake and it whistled like heck above 35mph lol
[Image: 17b33c2a-8471-4313-992e-0a4b324cf926_zps2e63812a.jpg]
Team Cyril
#52
Made some use of the new B+E entitlement on my licence lol

Picked up a local rotten but mechanically sound discovery 1 300TDi for £180, undecided on wether to just flip it on for a few quid or chop it about for an off roader toy Smile

[Image: IMG_2530_zpsouctwfak.jpg]

[Image: IMG_2531_zpsz0zds28o.jpg]

[Image: IMG_2532_zps8lk91xtm.jpg]

And of course gotta get the little un involved Big Grin loves any excuse to put her work boots on!

[Image: IMG_2533_zpsumcnkrbs.jpg]
[Image: 17b33c2a-8471-4313-992e-0a4b324cf926_zps2e63812a.jpg]
Team Cyril
#53
Flip it for money is the sensible option, you'll end up spending on it if you off roader it, tyres alone.
Let alone welding wire, gas and plasters for your fingers. :-)
                                             [Image: 2ljm03k.jpg]


                                                                                      I Don't Have A 306.
#54
(03-04-2017, 06:18 PM)Danny Wideboy Wrote: Flip it for money is the sensible option, you'll end up spending on it if you off roader it, tyres alone.
Let alone welding wire, gas and plasters for your fingers. :-)


Sold it last night for £420 Smile not bad for 24hrs!
[Image: 17b33c2a-8471-4313-992e-0a4b324cf926_zps2e63812a.jpg]
Team Cyril
#55
Good man.
Beers are on you. ;-)
                                             [Image: 2ljm03k.jpg]


                                                                                      I Don't Have A 306.
#56
(04-04-2017, 06:56 PM)Danny Wideboy Wrote: Good man.
Beers are on you. ;-)

Haha the beers are never on me! As soon as i got home with the cash it was removed from me in the name of nursery bills and food shopping! Did get a chinese out of it though so not all bad Smile
[Image: 17b33c2a-8471-4313-992e-0a4b324cf926_zps2e63812a.jpg]
Team Cyril
#57
Then you have much to learn, the art of making a few quid for the pub that the Mrs doesn't know about is a dark art.
But most refreshing. :-)
                                             [Image: 2ljm03k.jpg]


                                                                                      I Don't Have A 306.
#58
(05-04-2017, 06:11 PM)Danny Wideboy Wrote: Then you have much to learn, the art of making a few quid for the pub that the Mrs doesn't know about is a dark art.
But most refreshing. :-)

I save that money for landrover / 306 parts rather than the pub lol
[Image: 17b33c2a-8471-4313-992e-0a4b324cf926_zps2e63812a.jpg]
Team Cyril
#59
I like the pub and cars,  but not mixing the two,  obviously.   Rofl
                                             [Image: 2ljm03k.jpg]


                                                                                      I Don't Have A 306.
#60
Been doing a bit more trailer work recently Smile picked up a 2.5tds lwb frontera on 56k miles for £70 that i'll just be stripping a few parts off and weighing in on saturday.

Was a little trip out into the sticks

[Image: IMG_2580_zpshwvpmnof.jpg]

All loaded up and heading for home

[Image: IMG_2581_zpsmnspjkbd.jpg]

[Image: IMG_2582_zpssar15npr.jpg]

Also i finally got so p'eed off with the numberplate i chopped it down and bolted it to the bumper lol

[Image: IMG_2600_zpsw7ru5rg4.jpg]

Hopefully next week i'll have my winch mounted and i'll be sorting out my idea for some anderson connector style grille mounted long reach jump cables which i have been slowly amassing parts for!
[Image: 17b33c2a-8471-4313-992e-0a4b324cf926_zps2e63812a.jpg]
Team Cyril


Possibly Related Threads…
Thread Author Replies Views Last Post
  Matts cheapo saxo track bapper VTR/S Matt-Rallye 23 16,529 14-06-2016, 08:40 PM
Last Post: Piggy
  Matts 106 GTi Turbo. Matt-Rallye 118 68,401 10-01-2016, 07:21 AM
Last Post: Piggy
  Pugloves 300TDI Disco puglove 64 32,855 08-03-2015, 11:54 AM
Last Post: puglove

Forum Jump:


Users browsing this thread: 2 Guest(s)