loom problem

[ayton autosport]

Help I have a 1.8 engine and loom and im puttin a gti in ive just recived the loom but the two plugs near the ecu box one is the right size but rhe other is different what do I do next

thanks mat

[Niall]

Them two plugs plug in down by the N/S rad. You use both however the fact that one is brown suggests it could be a ph1 or 2 loom. Is the car ph1 or 2?

[Eeyore]

wow thats very dirty D:

[ayton autosport]

Its off a ph1 xsara and my cars a ph1 xsara they plug in by the blukhead on the n/s behind just behind the ecu

---

Heres where the loom connects to then goes to the clock and dash, both the new loom and my car are both ph1 xsaras

[Niall]

Ah sorry didn't realise it was a Xsara. Cant help then I'm afraid!

[ayton autosport]

Sam whats your loom like were it's connected here
mat

[ayton autosport]

Has anyone put a gti6 head on the 1.8 block I need to know what im going to do with the wiring seems ill have to cut and join the plug but im not sure which wire to which

mat