Posts: 39
Threads: 13
Joined: Mar 2014
Location: Dorset
Car Model/Spec: 306 1.9 dturbo s
Hi all was checking over my engine yesterday when I noticed a part attached by a wire behind the fuel pump. After a bit of research I've discovered it is the fuel cutoff solanoid. My question is it has one in the pump but looks like part of the pump has been cut away around the solanoid. the engine runs OK of not a little high on idle at 1k .so why have 2 attached and is it safe to remove the old one.
Posts: 148
Threads: 6
Joined: Jan 2012
Reputation:
1
Location: Birmingham
guessing : the one in the pump failed, they couldn't get a matching one so they added one in series...
Posts: 6,482
Threads: 226
Joined: Dec 2011
Reputation:
24
Location: Cornwall
Car Model/Spec: A3 TDi
Immobiliser has been bypassed i imagine. Do you have a keypad in the car? Do you have to use it?
Doesnt even own a 306.
Posts: 39
Threads: 13
Joined: Mar 2014
Location: Dorset
Car Model/Spec: 306 1.9 dturbo s
(29-03-2014, 10:57 PM)Tom Wrote: Immobiliser has been bypassed i imagine. Do you have a keypad in the car? Do you have to use it?
No don't have a key pad in it it's a phase 2 306. I'll put a pic up later.
Posts: 39
Threads: 13
Joined: Mar 2014
Location: Dorset
Car Model/Spec: 306 1.9 dturbo s
(30-03-2014, 10:07 AM)dadaddy35 Wrote: (29-03-2014, 10:57 PM)Tom Wrote: Immobiliser has been bypassed i imagine. Do you have a keypad in the car? Do you have to use it?
No don't have a key pad in it it's a phase 2 306. I'll put a pic up later.
Cant put a pic up for some unknown reason. but as the motto says if it aint broke don't fix it. cheers guys..