wheels 8x16

[paul7278]

my ph1 is lowered 40mm and ive seen some wheels i want, but there 8x16 et25 with 195 45 16 tyres ? would these look ok?

[rd070707]

You would want some spacers on there to bring the offset down, as the would be pretty tight to the inside of the arch / might not even fit depending on the condition of your beam

[puglove]

depends what wheels they are lol

[paul7278]

cant say what wheels lol but just seen they come with 10mm hubcentric spacers!

[rd070707]

Well that would make them et15. Get on willtheyfit.com and put the specs in and it will show you how they will sit compared to your current wheels

[paul7278]

are standard harriers 15 offset

[rd070707]

Not 100% sure mate all I know is cyclones are et18

[Sambarker]

Yeah they are either 15 or 18

[paul7278]

ok its these wheels secret out lol just need to know they fit?
http://media.fastcar.co.uk/wp-content/up...-wheel.jpg

[Chris]

You'll want a offset of around 10 and run 195 40 tyres if you want them to look half decent.

---

Oh and lower it another 60mm. Otherwise don't bother as it will look shit.

[rd070707]

0.05s are getting pretty common now, yet to see them on a 306 mind so might look decent

[Slam Wagon]

I want to see some 0.05s on a vip sedan

[puglove]

yeah your going to need like 80-100mm with rolled arches to pull them off with a ET 0 or 10 or it will just look stupid. also streched tyres.

[Piggy]

man they are paaaaaaooooorn

[puglove]

but your to scared to go lpw enough to have a set james

[ConorTRG]

I bought dare rs of here they ended up being et25 when they came, fronts are 8 inch wide and im using a 5mm spacer, rears are 9 inch and I had to get 12mm spacers, wouldn't even bolt on with 25 offset.