+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Suspension, Transmission, Handling & Braking (https://www.306oc.co.uk/forum/forumdisplay.php?fid=19)
+--- Thread: wheels 8x16 (/showthread.php?tid=16880)
wheels 8x16 - paul7278 - 29-08-2013
my ph1 is lowered 40mm and ive seen some wheels i want, but there 8x16 et25 with 195 45 16 tyres ? would these look ok?
RE: wheels 8x16 - rd070707 - 29-08-2013
You would want some spacers on there to bring the offset down, as the would be pretty tight to the inside of the arch / might not even fit depending on the condition of your beam
RE: wheels 8x16 - puglove - 29-08-2013
depends what wheels they are lol
RE: wheels 8x16 - paul7278 - 29-08-2013
cant say what wheels lol but just seen they come with 10mm hubcentric spacers!
RE: wheels 8x16 - rd070707 - 29-08-2013
Well that would make them et15. Get on willtheyfit.com and put the specs in and it will show you how they will sit compared to your current wheels
RE: wheels 8x16 - paul7278 - 29-08-2013
are standard harriers 15 offset
RE: wheels 8x16 - rd070707 - 29-08-2013
Not 100% sure mate all I know is cyclones are et18
wheels 8x16 - Sambarker - 29-08-2013
Yeah they are either 15 or 18
RE: wheels 8x16 - paul7278 - 29-08-2013
ok its these wheels secret out lol just need to know they fit?
http://media.fastcar.co.uk/wp-content/uploads/2012/06/3SDM-0-05-wheel.jpg
RE: wheels 8x16 - Chris - 29-08-2013
You'll want a offset of around 10 and run 195 40 tyres if you want them to look half decent.
Oh and lower it another 60mm. Otherwise don't bother as it will look shit.
RE: wheels 8x16 - rd070707 - 29-08-2013
0.05s are getting pretty common now, yet to see them on a 306 mind so might look decent
RE: wheels 8x16 - Slam Wagon - 29-08-2013
I want to see some 0.05s on a vip sedan
RE: wheels 8x16 - puglove - 29-08-2013
yeah your going to need like 80-100mm with rolled arches to pull them off with a ET 0 or 10 or it will just look stupid. also streched tyres.
RE: wheels 8x16 - Piggy - 29-08-2013
man they are paaaaaaooooorn
RE: wheels 8x16 - puglove - 29-08-2013
but your to scared to go lpw enough to have a set james
RE: wheels 8x16 - ConorTRG - 29-08-2013
I bought dare rs of here they ended up being et25 when they came, fronts are 8 inch wide and im using a 5mm spacer, rears are 9 inch and I had to get 12mm spacers, wouldn't even bolt on with 25 offset.