Wires through the bulkhead?

[Mitch]

I have tried searching but can't find anything, I know I've read it in a thread somewhere before but can't remember where, basically
What's the best way to route wires/vacuum pipes into the cab? I've read somewhere that the "ac bung" is the best place, but where is that? Cheers guys

[rocker8742]

Ac bungis at the top of the passenger footwell

Apparently there's also a good one for boost pipes by the master cylinder

[Rich306]

Just drill through!! :p

[cully]

Just drill through!! :p

ask Puglove where not to drill!

[Grant]

If you have a rallye then going through the AC bung is going to be a bit pointless lol.

Does your D-tub have AC?

[4WayDiablo]

There's a hole just off to the right and down of the brake servo as you look at it from the front

Cant remember what goes through it

[Mitch]

If you have a rallye then going through the AC bung is going to be a bit pointless lol.

Does your D-tub have AC?

Should of said that this was regarding the d tub, it did have ac but not anymore, managed to get them through that bung tonight, cheers guys

[Grant]

Ah fair enough then mate.


Thats the steering column universal joint phil

There's a hole just off to the right and down of the brake servo as you look at it from the front

Cant remember what goes through it

[4WayDiablo]

Ah fair enough then mate.


Thats the steering column universal joint phil

There's a hole just off to the right and down of the brake servo as you look at it from the front

Cant remember what goes through it

I'm sure that does go through somewhere around d there
But its not that!
Ginge knows his boost gauge went through it. Maybe one of the pedal cables

[Grant]

Could be the clutch or accelerator cables then in that case. The UJ or the steering column is a nice big gromit though so nice and easy to do there

[Tom]

To the right of the master cylinder is a lovely one. I got vacuum hose and amp power going through that one

[Mitch]

Ok cheers guys, sure they will all come in use