+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Electrics (https://www.306oc.co.uk/forum/forumdisplay.php?fid=23)
+--- Thread: Wires through the bulkhead? (/showthread.php?tid=15212)
Wires through the bulkhead? - Mitch - 03-07-2013
I have tried searching but can't find anything, I know I've read it in a thread somewhere before but can't remember where, basically
What's the best way to route wires/vacuum pipes into the cab? I've read somewhere that the "ac bung" is the best place, but where is that? Cheers guys
Re: Wires through the bulkhead? - rocker8742 - 03-07-2013
Ac bungis at the top of the passenger footwell
Apparently there's also a good one for boost pipes by the master cylinder
RE: Wires through the bulkhead? - Rich306 - 04-07-2013
Just drill through!! :p
RE: Wires through the bulkhead? - cully - 04-07-2013
(04-07-2013, 09:59 AM)Rich306 Wrote: Just drill through!! :p
ask Puglove where not to drill!
RE: Wires through the bulkhead? - Grant - 04-07-2013
If you have a rallye then going through the AC bung is going to be a bit pointless lol.
Does your D-tub have AC?
RE: Wires through the bulkhead? - 4WayDiablo - 04-07-2013
There's a hole just off to the right and down of the brake servo as you look at it from the front
Cant remember what goes through it
RE: Wires through the bulkhead? - Mitch - 04-07-2013
(04-07-2013, 12:36 PM)Grant Wrote: If you have a rallye then going through the AC bung is going to be a bit pointless lol.
Does your D-tub have AC?
Should of said that this was regarding the d tub, it did have ac but not anymore, managed to get them through that bung tonight, cheers guys
RE: Wires through the bulkhead? - Grant - 04-07-2013
Ah fair enough then mate.
Thats the steering column universal joint phil
(04-07-2013, 01:28 PM)4WayDiablo Wrote: There's a hole just off to the right and down of the brake servo as you look at it from the front
Cant remember what goes through it
RE: Wires through the bulkhead? - 4WayDiablo - 04-07-2013
(04-07-2013, 09:19 PM)Grant Wrote: Ah fair enough then mate.
Thats the steering column universal joint phil
(04-07-2013, 01:28 PM)4WayDiablo Wrote: There's a hole just off to the right and down of the brake servo as you look at it from the front
Cant remember what goes through it
I'm sure that does go through somewhere around d there
But its not that!
Ginge knows his boost gauge went through it. Maybe one of the pedal cables
RE: Wires through the bulkhead? - Grant - 04-07-2013
Could be the clutch or accelerator cables then in that case. The UJ or the steering column is a nice big gromit though so nice and easy to do there
RE: Wires through the bulkhead? - Tom - 05-07-2013
To the right of the master cylinder is a lovely one. I got vacuum hose and amp power going through that one
RE: Wires through the bulkhead? - Mitch - 05-07-2013
Ok cheers guys, sure they will all come in use