1x Stanced ph3 on BBS, 2x blaze ph1

[Eeyore]

Whats with the bits on the top of the bumper?

[Jake]

Probably washer jets ?

[mark_airey]

^^ this, headlight washer jet holes by the looks of it.............

[hedis]

Yeah, thats the f*cking washers.. again! Hate them big time!

The thing ive done last week is that the car is lowered about 10mms more! Right now its exactly 27mm between the subframe and ground

This is the only pic i have right now after it been lowered.. :/

After


Before


My drive shaft ^^


and sub frame

[Dan!]

Rolling hard. Need more cars like this over here!

[Ruan]

These cars are awesome.

This is what the UK needs...

This is why Sweden is infact the best country in the world.

[hedis]

Here are some new pics! I've lowered the car about 5mm more in front







I've also got new tyres because to much toe in rear.. I need to find my motivation again, I really don't like doin' this anymore.. But i love my car!

The distance lip - arch is about 1inch all way round and the sub frame is 23 mm from the ground

[kingy]

:o fap fap fap.

[Pete]

Awesome lows right there!

[rd070707]

The black one is giving me great ideas for mine! so hard to work out the exact wheel fitment you want though. looks like the rear arches on the black one haven't been pulled just rolled, this is what I want but I suppose the camber helps big time

[Scott]

Holy thread revival Batman!

I forgot how awesome this car is (with the exception of the windscreen sticker).

[rd070707]

I know lol, but I've been studying it lately for inspiration. Awesome car and stance

[kingy]

^^agreed. Totally awsome.

[rd070707]

Its the look I'm after, I wanted 16s although he definately pulls off the 15s with how low it is

[lolsteve]

Not big on bbs for 306s just don't seem like a car that they work with. more like you putting bbs on becausebbs

[Scott]

I don't know man, I've seen a few and they don't suit it, but this really does seem to work well.

[darrenjlobb]

A agree with Scott above ^^

These wheels either work, or its a disaster...


In this case, god it works, literally porn.

[hedis]

Thanks peeps!

First time in a year I've logged on

The sticker is removed, my front lip is cracked and my exhaust cracked due to much scrape ^^ will fix it this week

Right now it's jut my daily, have the track car to work with and a VW 1200 1958


Some new pics



Swapped to black headlights





And yeah, I've lost the bbs dekal(?!) on one wheel... :/

[rd070707]

bloody low for a daily! lol. So with 9s on the rear and et -2 what arch work did you need? doesnt seem to be that much difference to the appearance of the arch?

[Scott]

It's a bit too low for my taste, but it looks seriously smart! Awesome effort.

You should stick around a bit more

[vlj]

Looks really nice with the masks on!

[sam]

I want mine this low got to be my favourite gti ever did you find out how low you could have your car, the bit you spoke to me on instagram?

[hedis]

bloody low for a daily! lol. So with 9s on the rear and et -2 what arch work did you need? doesnt seem to be that much difference to the appearance of the arch?

Just rolled the fenders, they are not pulled! I also have 3deg neg camber on rear

It's a bit too low for my taste, but it looks seriously smart! Awesome effort.

You should stick around a bit more

I'll try! Next time I visit London you have to show me the car scene or just what y'all up to! My girlfriend lived in London for 9 years so were visiting London a couple of times a year

I want mine this low got to be my favourite gti ever did you find out how low you could have your car, the bit you spoke to me on instagram?

How low I could have my car? I don't get it ^^ I can't lower it any more. I have to modify the suspension in that case :p

The driveshaft was hitting the beam(?!) so I had to modify it a little bit, here's a picture of it

[rd070707]

Fair play man just shows me what I can achieve as I don't want to pull the arches either. I was looking at 8j wheels though as I didnt think I could achieve 9j without a lot of pulling

[hedis]

Fair play man just shows me what I can achieve as I don't want to pull the arches either. I was looking at 8j wheels though as I didnt think I could achieve 9j without a lot of pulling

I think you are able to fit 9 without pulling the arches, it will be tight and with 2-3 mm clearance on the back of the wheel. You will have to cut the plastic on the inside.

[rd070707]

Ah right fair enough, I think you're neg camber is the biggest help though so if I am running no camber I will need higher offset. Looks absolutely awesome though fair play, perfect stance in my opinion

[hedis]

Ah right fair enough, I think you're neg camber is the biggest help though so if I am running no camber I will need higher offset. Looks absolutely awesome though fair play, perfect stance in my opinion

Yeah, you'll need higher offset. I've got 10+3mm spacer on rear to make it fit, and 20+5mm on front.

What you can do is take a wheel, like gti alloys with no tyres, and use spacers to measure where you want it, measure also the clearance on the inside and use www.willtheyfit.com

[rd070707]

Yeah on willtheyfit all the time. Kinda wanted 16s as I thought they'd fill the arch more as I don't think I could get mine as low as yours lol. And probably a 40 profile tyre too

[ConorTRG]

That is lovely looking, does the wheels not catch badly on the arch on the black one? Mine isnt just as low but I shred the tyres when im turning.

[sam]

The one for your track car? Camber rear trailing arms from cbr450?