306oc - Peugeot 306 Owners Club & Forum

The black one is a 2000 and this is what ive done:

TA Technix coils in front and PTS 25.5mm torsion bars in rear
Lowered 100-120mm in front and 80-90mm i believe, I have no ide ^^
Modified hubs in front and modified tailing arms in rear with 3 deg neg camber all round
BBS RS wheels 15x9 ET-2 in rear and 15x8.5 ET-6 in front (with spacers)
Falken ZIEX 912 195/45 all round

Smoothed grille, smoothed bumper and smooted trunk is on the list. And a repaint!















And some pics of my brothers and my car
















Here are some pics of my old blaze ph1 that i hade some wiiide steels, today is back to original (the stuff thats on the black one was on this car before)
15x9 ET-11 all round










And here are some pics of my track day car. New pistons, rods, camshafts, ITBs and some other stuff that i cant remember right now ^^ its a N/A ofc!
GAZ coils 600lbs/inch, 25.5mm PTS torsion bars, 3 deg neg camber in rear. Looking for something in front ^^











If you wonder anything, feel free to ask! I can answer almost everything ^^,

Gorgeous cars mate, loving the bbs's!

Pretty much everything in this thread is total win, even a 206 looks okish, and thats impressive given my opionons of said cars, but the 306's are faptastic!

Thanks alot!

Here are a pic that tells the true colour of the rims. However they are a bit dusty..

Those wheel look amazing. Purple ftw!

I'm not keen on 206s but that actually looks pretty smart!

600lb springs!? What's that like to drive?

Purple win!!!!! Knew I was onto a winnar with purple

Cars looking awesome mate

looks epic! Love them all!

They all look absolutely spot on.

And, it's good to have another Scandinavian on the forum =D

Scott Wrote:Those wheel look amazing. Purple ftw!

I'm not keen on 206s but that actually looks pretty smart!

600lb springs!? What's that like to drive?

Tooooo soft!

No, its a pretty good balance between the 600 lbs springs and the 25.5 torsion bars and 28.5 hybrid ARB

Toby Wrote:They all look absolutely spot on.

And, it's good to have another Scandinavian on the forum =D

Cool! Where are you from?

They all look awesome, however the blaze was epic IMO. Nicest colour and phase topped off with epic wheels.

Hedis Wrote:

Toby Wrote:They all look absolutely spot on.

And, it's good to have another Scandinavian on the forum =D

Cool! Where are you from?

Bergen originally, currently living in England though

Nice cars, they all look awesome, even the 206 which is saying something, I have seen the blaze before and loved it! the black one also looks sweet but I think I prefer the ph1, I'm sick of seeing ph3 cars

mark_airey Wrote:Nice cars, they all look awesome, even the 206 which is saying something, I have seen the blaze before and loved it! the black one also looks sweet but I think I prefer the ph1, I'm sick of seeing ph3 cars

Aah, I see! But the thing is that the ph3 is really rare in Sweden and the blaze ph1 is the most common, that why i loooove the ph3. But there is something about the ph1 too!

Toby Wrote:

Hedis Wrote:Cool! Where are you from?

Bergen originally, currently living in England though

Nice! I have some relatives in Norway also ^^,

Yeah its the other way round over here, everyone fits ph3 bumpers and I am sick of seeing them fair play if you have done it to be different, still love how it sits with the camber!

how many J was the wheels ? did you roll the arches ? what other mods did you have to do to fit the wheels on the phase 1 cars are looking good by the way

gurj306 Wrote:how many J was the wheels ? did you roll the arches ? what other mods did you have to do to fit the wheels on the phase 1 cars are looking good by the way

If you look at the first post again you can se that the banded steelies are 9j et-11 all round. I've just rolled the arches and haven't pulled it out, so the shape of the body looks still original. On the 3rd and 4th pic there is no camber, but on the 1st and 2nd there are some camber mods, and ofc lowered a bit more.

This weekend om thinking of cut in the frame so I can lower the black one 10 mms more. Right now the driveshaft hit the frame if i brake hard ^^

OK I'm going to ask because I am curious and think it looks sweet, what mods are you doing to get the camber? adjustable top mounts on the front?

mark_airey Wrote:OK I'm going to ask because I am curious and think it looks sweet, what mods are you doing to get the camber? adjustable top mounts on the front?

The camber on the rear is redrilled tailing arms and on the front its redrilled hubs with a sleeve so i can choose what amount of camber i want

The neg thing with the redrilled tailing arm is that its drilled to be at original ride height, or a little lowered. And now when ive slammed the car i got a lot of toe in :/ But im going to figure something out ^^

You've done some nice work there, very good looking cars!

Im loving the blaze ph1! i had it as my desktop backround before you posted these pics on here!
how did you do the headlight washers??

Garlicbread Wrote:Im loving the blaze ph1! i had it as my desktop backround before you posted these pics on here!
how did you do the headlight washers??

They are standard issue on most Scandinavian cars due to the weather conditions.

Garlicbread Wrote:Im loving the blaze ph1! i had it as my desktop backround before you posted these pics on here!
how did you do the headlight washers??

As Toby says, being in Sweden he bought the car with them fitted like they all have to have over there IIRC

Toby Wrote:They are standard issue on most Scandinavian cars due to the weather conditions.

Ahh i see!

i want them....

Will I think the OP could well be the person to be asking to source you some get PMing

Haha! good idea but i bet postage will be a bomb!
would be worth it though, hmm......

Garlicbread Wrote:Haha! good idea but i bet postage will be a bomb!
would be worth it though, hmm......

No harm in asking though is there, bet postage isn't that bad!

mark_airey Wrote:No harm in asking though is there, bet postage isn't that bad!

Only one way to find out!

Postage would be less than a tenner i'd have thought.

Cars look well smart mate!

hedis Wrote:

gurj306 Wrote:how many J was the wheels ? did you roll the arches ? what other mods did you have to do to fit the wheels on the phase 1 cars are looking good by the way

If you look at the first post again you can se that the banded steelies are 9j et-11 all round. I've just rolled the arches and haven't pulled it out, so the shape of the body looks still original. On the 3rd and 4th pic there is no camber, but on the 1st and 2nd there are some camber mods, and ofc lowered a bit more.

This weekend om thinking of cut in the frame so I can lower the black one 10 mms more. Right now the driveshaft hit the frame if i brake hard ^^

oooo sweeet i was thinkin of puttin my 9j borbets on my car hmmm thanks for the info mate

that blaze is pure 306 porn.