Rear light cluster issue.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Rear light cluster issue.
#1
Right passanger side rear cluster is driving me crazy.

Drivers side is all fine, basically the running lights don't work.
Reverse fine,
Brake fine,
Indicator fine,
Fog fine.

I have swapped the bulbs from one side to the other no issues with bulbs.
I have also noticed the number plate bulbs aren't working.

So far I have re wired the number plate lights, changed the connector for the number lights, which plugs into rear light connector.

Any ideas? Could it be a fuse? If so which one save me checking them all.
Lights have been earthed in the past.
Reply
Thanks given by:
#2
Have you checked to make sure the earth is good? And checked for corosion on the board the bulbs go in to?

Also check the plug that runs off the drivers side light to the pas side
Reply
Thanks given by:
#3
No board. Sorry should have said phase 1 lights.

Earth has always worked before.
Reply
Thanks given by:
#4
There is a board on phase 1 lights that the bulbs go in to its plastic with metal runing around it. It pops off the light unit so you can change the bulbs mine was badly corroded
Reply
Thanks given by:
#5
I'd take the earth off give it a bloody good sand down on both surfaces an give it another try
[Image: 20A1806D-891D-40FB-BD52-AD519177A607-734...391753.jpg]
TEAM CONROD SHITTING RALLYE!
Reply
Thanks given by:


Possibly Related Threads…
Thread Author Replies Views Last Post
  Brake light switch issue Iceman299 4 1,964 26-07-2015, 02:01 PM
Last Post: Iceman299
  Phase 1/2 rear light wiring diagrams. ADV_93 1 1,395 04-09-2014, 02:45 PM
Last Post: doogle-d turbo
  Phase 1 rear light wiring PartyJas 1 827 10-07-2014, 12:29 PM
Last Post: Frosty

Forum Jump:


Users browsing this thread: 1 Guest(s)