Clearing out all my unneeded spares, lots of bargains to be had. Open to offers on everything, discounts for multi-buys, postage can be arranged if not listed. Can get pictures of any other bits if wanted, please do ask.
Blue fleck S16 seats and door cards in good condition, drivers seat needs a couple of minor repairs. £100 collected.
Gti6 seats in good condition, one small patch to drivers bolster. £90 collected.
3 x HDi engine cover
2 standard. £15 posted each.
1 C5 HDi jobby, OEM FMIC engine cover, came from factory with cut-out for piping. £20 posted.
![[Image: DSC_0149_zps1b810a81.jpg]](http://i803.photobucket.com/albums/yy311/acpoodle/For%20sale/DSC_0149_zps1b810a81.jpg)
95k HDi injector, was saving it to take to bits, but if anyone wants it... £20 posted.
2 x XUD fuel filter housing.
1 from a 306. £10 posted
1 from a 406, with fuel-coolant heat exchanger and sensors attached. £18 posted (heavy).
BNIB fuel filter (£2) can be included with either of these.
BNIB fuel filter for XSi cabby, probably the same as most other XU petrols, but check the Mahle part number: KL458. Free collected.
Ph2/3 XU10 power steering pump. £10 collected.
Ph2/3 XU10 starter motor. £10 collected.
Ph2/3 XU10 alternator. £10 collected.
16mm nsf hub. £10 collected.
18mm osf hub. £10 collected.
BNIB pair of handbrake cables for ph1 hatch, drums. £20
HDi 266mm pair of front calipers, need new pads, come with bleed nipples. £10 collected.
(Can service them before posting or supply with good discs for an extra tenner.)
2 x Hydraulic roof pump for 306 cabriolet.
One in perfect working condition. £35 posted.
One untested with some minor surface corrosion. £10 collected.
GENUINE BNIB 405 window seal, part number 9310.62. £25 posted. (Uber-rare and will be wrapping it very thoroughly to post.)
Ph2 column stalks. £10 posted the pair.
Ph2/3 heater matrix. A bit tatty, but in perfectly useable condition. £10 posted.
206 GTi Foudre 15" alloys with tyres, 3-4mm tread, one needs replacing iirc. Correct PCD and bore, need spacers really, although have run them without. £90ono collected.
They are all in similar condition to this:
![[Image: DSC_0137_zpsa13e38e3.jpg]](http://i803.photobucket.com/albums/yy311/acpoodle/For%20sale/DSC_0137_zpsa13e38e3.jpg)
Steel wheels 14" with tyres, two with 5-6mm tread, two with 4mm tread. £60ono collected.
Blue fleck S16 seats and door cards in good condition, drivers seat needs a couple of minor repairs. £100 collected.
Gti6 seats in good condition, one small patch to drivers bolster. £90 collected.
3 x HDi engine cover
2 standard. £15 posted each.
1 C5 HDi jobby, OEM FMIC engine cover, came from factory with cut-out for piping. £20 posted.
![[Image: DSC_0149_zps1b810a81.jpg]](http://i803.photobucket.com/albums/yy311/acpoodle/For%20sale/DSC_0149_zps1b810a81.jpg)
95k HDi injector, was saving it to take to bits, but if anyone wants it... £20 posted.
2 x XUD fuel filter housing.
1 from a 306. £10 posted
1 from a 406, with fuel-coolant heat exchanger and sensors attached. £18 posted (heavy).
BNIB fuel filter (£2) can be included with either of these.
BNIB fuel filter for XSi cabby, probably the same as most other XU petrols, but check the Mahle part number: KL458. Free collected.
Ph2/3 XU10 power steering pump. £10 collected.
Ph2/3 XU10 starter motor. £10 collected.
Ph2/3 XU10 alternator. £10 collected.
16mm nsf hub. £10 collected.
18mm osf hub. £10 collected.
BNIB pair of handbrake cables for ph1 hatch, drums. £20
HDi 266mm pair of front calipers, need new pads, come with bleed nipples. £10 collected.
(Can service them before posting or supply with good discs for an extra tenner.)
2 x Hydraulic roof pump for 306 cabriolet.
One in perfect working condition. £35 posted.
One untested with some minor surface corrosion. £10 collected.
GENUINE BNIB 405 window seal, part number 9310.62. £25 posted. (Uber-rare and will be wrapping it very thoroughly to post.)
Ph2 column stalks. £10 posted the pair.
Ph2/3 heater matrix. A bit tatty, but in perfectly useable condition. £10 posted.
206 GTi Foudre 15" alloys with tyres, 3-4mm tread, one needs replacing iirc. Correct PCD and bore, need spacers really, although have run them without. £90ono collected.
They are all in similar condition to this:
![[Image: DSC_0137_zpsa13e38e3.jpg]](http://i803.photobucket.com/albums/yy311/acpoodle/For%20sale/DSC_0137_zpsa13e38e3.jpg)
Steel wheels 14" with tyres, two with 5-6mm tread, two with 4mm tread. £60ono collected.