Removing aircon from gti6

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Removing aircon from gti6
#1
As my air con is nackerd in the 6 i am going to remove it inc the pump from The engine.

Does anyone know what parts i need to do this? How much they cost? And where to get them from?

Thanks in advance Big Grin
Reply
Thanks given by:
#2
Iirc don't you just need a new belt? From a car with the non air con? Like the rallye
[Image: 20A1806D-891D-40FB-BD52-AD519177A607-734...391753.jpg]
TEAM CONROD SHITTING RALLYE!
Reply
Thanks given by:
#3
You need the non-ac aux set-up from the rallye. Slightly different pulley arrangement iirc...
'99 Ph3 Diablo Gti(Victor) Dead
Astor 'X' 4 GTi6-6 - SOLD! Sad
'08 LY Renault Megane RS 230 F1 Team R26 - GONE
'56 BMW Z4 Coupe 3.0si Sport - SCHWIIIING!
Reply
Thanks given by:
#4
Thats what i was thinking but ive read that mayb there is more to it than just changing the belt to a smaller rallye one? Tensioners or a pulley mayb?

Ed do you know if i can get this as a kit? If so any ideas on price and where from? Smile

Also would the aux set up be the same from a non a/c 2.0 16 xsi?
Reply
Thanks given by:
#5
Just buy the rallye parts instead of the '6 equivalent
[Image: 20A1806D-891D-40FB-BD52-AD519177A607-734...391753.jpg]
TEAM CONROD SHITTING RALLYE!
Reply
Thanks given by:
#6
Yep, just get the rallye tensioner and idler.

Also remove all the pipework while the engine is out of the car.
[Image: sig.jpg]
Reply
Thanks given by:
#7
^^ Chris he's not taking his engine out?! His AC Is knackered that's all!!

I think Lynxengineering sell a kit, but the simplest way would be to have a quick search of the '6 forum, find out what the rallye set-up involves, and just buy that with a rallye belt Smile

I'll have a peek when I get a minute, see if I can find any info on it Smile
'99 Ph3 Diablo Gti(Victor) Dead
Astor 'X' 4 GTi6-6 - SOLD! Sad
'08 LY Renault Megane RS 230 F1 Team R26 - GONE
'56 BMW Z4 Coupe 3.0si Sport - SCHWIIIING!
Reply
Thanks given by:
#8
I could walk outside and look at my rallye? Tongue

And ed seriously stop with the lynx!!! He wants to buy them not get bummed for them
[Image: 20A1806D-891D-40FB-BD52-AD519177A607-734...391753.jpg]
TEAM CONROD SHITTING RALLYE!
Reply
Thanks given by:
#9
(22-06-2012, 12:50 PM)Matt Wrote: I could walk outside and look at my rallye? Tongue

I wouldn't bother mate, you wont get an accurate representation; as it's a ph2 most of it's probably fallen off already... Tongue




AND SO IT BEGINS ninja
'99 Ph3 Diablo Gti(Victor) Dead
Astor 'X' 4 GTi6-6 - SOLD! Sad
'08 LY Renault Megane RS 230 F1 Team R26 - GONE
'56 BMW Z4 Coupe 3.0si Sport - SCHWIIIING!
Reply
Thanks given by:
#10
The engine is currently out of the car so will be removing all the a/c pipes and that aswell Smile
Matt any chance you can pm me ur reg and chasi number mate and i can use that to give my local motor factors so i get the rite parts Smile
Reply
Thanks given by:
#11
Can anyone throw a link/part# up for the rallye aux setup. Having trouble finding it

Thanks
[Image: car-1.jpg]

Member of the 99% warning or you're nothing club


2000 Moonstone 1.8 Meridian - Sold
2000 China 3dr XS - Dead
1998 Diablo 3dr XSI
Reply
Thanks given by:
#12
found this on the '6 forum
   

looked on the gsf site, they only have the part nmbers for the ac set up, and my service box is broked
[Image: k6f9Fk]


Member of the 99% warning or you're nothing club
Reply
Thanks given by:
#13
(22-06-2012, 01:27 PM)Ed Doe Wrote:
(22-06-2012, 12:50 PM)Matt Wrote: I could walk outside and look at my rallye? Tongue

I wouldn't bother mate, you wont get an accurate representation; as it's a ph2 most of it's probably fallen off already... Tongue




AND SO IT BEGINS ninja

Surley the fact mines a rallye it doesn't count? Plus mine is epic winning!

Plus lighter than yours by choice not by accident Tongue
[Image: 20A1806D-891D-40FB-BD52-AD519177A607-734...391753.jpg]
TEAM CONROD SHITTING RALLYE!
Reply
Thanks given by:
#14
Thanks sam Smile big help mate will compare that pic to my a/c setup and see exacly what i need if you can get the part numbers mate when its working again that would be awsome Smile
Reply
Thanks given by:
#15
(22-06-2012, 05:02 PM)Matt Wrote:
(22-06-2012, 01:27 PM)Ed Doe Wrote:
(22-06-2012, 12:50 PM)Matt Wrote: I could walk outside and look at my rallye? Tongue

I wouldn't bother mate, you wont get an accurate representation; as it's a ph2 most of it's probably fallen off already... Tongue




AND SO IT BEGINS ninja

Surley the fact mines a rallye it doesn't count? Plus mine is epic winning!

Plus lighter than yours by choice not by accident Tongue

How well does your auto window work Matt? I've heard that ph2s have trouble with these .....oh wait!
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Reply
Thanks given by:
#16
Who needs auto windows? Never had em in the xsi either!
[Image: 20A1806D-891D-40FB-BD52-AD519177A607-734...391753.jpg]
TEAM CONROD SHITTING RALLYE!
Reply
Thanks given by:
#17
I also want to know this information ninja
[Image: Signature.jpg]
Reply
Thanks given by:
#18
Thread below should help you lot out a bit:

http://www.306gti6.com/forum/showthread.php?id=148822

Retro is cool anyway & windy windows are retro Smile
Reply
Thanks given by:
#19
Gatt38098 tensioner
Gatt36036 idler
Gatt6pk1163 belt

So these are the part numbers that are needed for gates thanks for the.link mate Big Grin
Reply
Thanks given by:
#20
was just about to comment and say the hdi and dturbo to remove the ac pump you just use a 6pk1163
[Image: sig-1.jpg]

106 Xud9 Conversion GtiD (2nd Engine Rebuild)
SOLD

Dan! Wrote:Want me to blow this one up for you aswel?
Reply
Thanks given by:
#21
this is the link on unipart... but which ones are they?

http://www.unipartautomotive.co.uk/Engin...Tensioners

Looking at the picture Bongo put up... its the £32.90 tensioner.. and the £38.70 idler... = £71.60 so then would need the belt?!
[Image: Signature.jpg]
Reply
Thanks given by:
#22
Link only goes to unipart website mate Smile
Reply
Thanks given by:
#23
Gay... Go to it and chuck Matt's reg in Wink

UGCGBT6036 - Idler
UGCGBT8098 - Tensioner
[Image: Signature.jpg]
Reply
Thanks given by:
#24
Go to a scrappy and find any xu petrol engined 306 and take the parts off that. £bumrape for the rallye parts, pennies from any other 306
[Image: signature_zps1a02ba79.jpg]
Reply
Thanks given by:
#25
Are the parts the same tho?

Tgk got it now mate yh they look correct Smile
Reply
Thanks given by:
#26
afaik, all the aux belt set ups on the xu engines are the same, with the only different being the ac or non ac. obviously. good shout on the scrappy, might have a butchers next time im down, all the ones there seem to have ac tho... Undecided
[Image: k6f9Fk]


Member of the 99% warning or you're nothing club
Reply
Thanks given by:
#27
Think some of the belts are different. PAS pulley on the 6 is smaller than the one on the 1.8 So some have a shorter belt.
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Reply
Thanks given by:
#28
T553 rwy that's my reg for anyone looking for parts Wink
[Image: 20A1806D-891D-40FB-BD52-AD519177A607-734...391753.jpg]
TEAM CONROD SHITTING RALLYE!
Reply
Thanks given by:
#29
just so people can see the difference this is my standard 6 setup with aircon Smile
[Image: 100_5326.jpg]
Reply
Thanks given by:
#30
I tried to get some screenshots from ServiceBox but I can't find the right section for it. If anyone needs it and knows what section it is post it up and I'll grab some screenshots.
Reply
Thanks given by:


Forum Jump:


Users browsing this thread: 3 Guest(s)