Block work - stage 3

[dr_jekyll]

Ok-
Plan of action is as follows
- pre 100k lump
- victor reins mls headgasket
- ports/valves de-coked
- gates cambelt
- arp head studs
- new aux setup with manual tensioner
- low mileage injectors
- low mileage r70
- 1.6 hdi fps
- fresh paddle clutch
- gt2052s setup as already installed on current lump

Really struggerling to find much info on the arp head studs. Pretty obv nothings gonna fit directly but if someone could point me in the right direction i could always custom lathe spacers


Sent from my SM-G920F using Tapatalk

the XUD arp head studs will fit..  but you need to turn the spacers used on the XUD head down somewhat, reducing them 18mm rings a bell, but i will confirm as i machined my set down to fit the HDi 8v head suitably..

If you could confirm it would deffinatley be helpful. Where can i get the studs from?

If you cant find the dimensions i'll get a new stock set of head bolts as a comparitor and work it out myself as machining is one thing i can actually do.

The part im desperatley struggerling with is finding where to buy these studs even for an xud

Sent from my SM-G920F using Tapatalk