Posts: 3,762
Threads: 9
Joined: Dec 2011
Reputation:
19 Location: Northwest (Cumbria)
Car Model/Spec: Ph2 DT with big Snail.....
Thanks: 0
OK I found this and thought I would share as it contains a lot of useful info, there is a page full or torque settings and its far more useful than the Haynes manual in general as its pretty engine specific!
Attached Files XUD9.pdf (Size: 2 MB / Downloads: 986)
Posts: 8,019
Threads: 374
Joined: Dec 2011
Reputation:
38 Location: Isle of Wight
Car Model/Spec: GTI 6
Thanks: 8
Wow, some excellent information in there including torque settings!
Posts: 11
Threads: 4
Joined: May 2012
Car Model/Spec: Daily drive D turbo...
Thanks: 0
Posts: 3,762
Threads: 9
Joined: Dec 2011
Reputation:
19 Location: Northwest (Cumbria)
Car Model/Spec: Ph2 DT with big Snail.....
Thanks: 0
I'm going to bump this before it disappears, maybe I should have put it into the "Guides" section, just thought it might be more appropriate in here but maybe not as it seems that nobody cares
Posts: 14,208
Threads: 448
Joined: Dec 2011
Reputation:
51 Location: isle of wight
Car Model/Spec: Pov. Spec White '6
Thanks: 17
Made it a sticky
TEAM CONROD SHITTING RALLYE!
Posts: 4,604
Threads: 90
Joined: Dec 2011
Reputation:
54 Location: Cornwall
Car Model/Spec: 1996 306 DT M-TDI/16
Thanks: 0
Nice one Mark, tonnes of usefull info in there....
| Dyno Power Runs & Steady State Facilities Available, Just Ask Anytime | | #DervMafia |
Posts: 3,762
Threads: 9
Joined: Dec 2011
Reputation:
19 Location: Northwest (Cumbria)
Car Model/Spec: Ph2 DT with big Snail.....
Thanks: 0
Matt Wrote: Made it a sticky
Fanks Matt
darrenjlobb Wrote: Nice one Mark, tonnes of usefull info in there....
This was my thinking, it pretty much tells you how to strip and rebuild an entire XUD engine!
Posts: 8,019
Threads: 374
Joined: Dec 2011
Reputation:
38 Location: Isle of Wight
Car Model/Spec: GTI 6
Thanks: 8
mark_airey Wrote: This was my thinking, it pretty much tells you how to strip and rebuild an entire XUD engine!
* Darren has just lost 100 youtube subscribers *
/canofworms
Posts: 3,762
Threads: 9
Joined: Dec 2011
Reputation:
19 Location: Northwest (Cumbria)
Car Model/Spec: Ph2 DT with big Snail.....
Thanks: 0
ginge191 Wrote: mark_airey Wrote: This was my thinking, it pretty much tells you how to strip and rebuild an entire XUD engine! there is no replacement for a video when you are trying to work out how the hell you remove something though
Posts: 701
Threads: 59
Joined: Dec 2011
Reputation:
3 Location: Gillingham Kent
Car Model/Spec: 306 D-turbo
Thanks: 0
Very useful mate just had a quick flick through.
Posts: 5,205
Threads: 91
Joined: Dec 2011
Reputation:
83 Location: Oxfordshire/Cornwall
Car Model/Spec: Moonstone DT/Volvo V50
Thanks: 2
Quote: Maximum fuel flow and speed adjustments are sealed and should only be unsealed by a CAV Lucas ROTODIESEL service dealer.
Whoops! Oh well!!
(16-05-2016, 10:45 AM) Toms306 Wrote: Nanstone GTD5 GT17S - XUD9TE
Volvo V50 D5 R-Design SE Sport - Daily cruise wagon.
Posts: 3,762
Threads: 9
Joined: Dec 2011
Reputation:
19 Location: Northwest (Cumbria)
Car Model/Spec: Ph2 DT with big Snail.....
Thanks: 0
Ruan Wrote: Quote: Maximum fuel flow and speed adjustments are sealed and should only be unsealed by a CAV Lucas ROTODIESEL service dealer.
Hehe, there are some amusing translations in it too in places
Posts: 433
Threads: 36
Joined: Dec 2011
Reputation:
2 Thanks: 0
exceeellent work mark!
Posts: 4,926
Threads: 266
Joined: Dec 2011
Reputation:
18 Location: Somerset
Car Model/Spec: 205 DTurbo
Thanks: 73
n0v0s Wrote: exceeellent work mark!
Probably cheapest to go remove them from a scrappy engine..?
Posts: 433
Threads: 36
Joined: Dec 2011
Reputation:
2 Thanks: 0
You reckon? Probs not round Birmz, most of the remaining scrappies here have major attitude problems.. act all superior and have inflated prices.. All the gd places have shut up shop looong ago, seriously miss clambering over stacked cars whilst removing bits off a car wobbling away on the roof of another balanced with a piece of wood
lol
Ill search ebay for a hdi half block, get the shells that way too
Posts: 1,833
Threads: 91
Joined: Dec 2011
Reputation:
12 Location: Wrexham
Car Model/Spec: 306 D Turbo
Thanks: 0
Only just had a read through. Good find!
Supercharged XUD Project - Dead
Posts: 10
Threads: 4
Joined: Apr 2012
Thanks: 0
Posts: 1,213
Threads: 92
Joined: Dec 2011
Reputation:
5 Location: Birmingham
Car Model/Spec: Subaru 20.d, GTi 6, 205 xs
Thanks: 0
n0v0s try hoppers on electric avenue, aston i spend a lot of time there and crawford street saltley, and theres 1 in hall green a moseley
Vehicle repair and servicing in the midlands pm for details Current cars Subaru Impreza 2.0d - Daily 306 1.8 - track whore soon to be GTI6
Posts: 1,748
Threads: 41
Joined: Dec 2011
Reputation:
12 Location: Midlands
Car Model/Spec: Dtractor
Thanks: 0
Piston protrusion over deck, jesus thats some serious anal about a gasket thickness!
Posts: 3,762
Threads: 9
Joined: Dec 2011
Reputation:
19 Location: Northwest (Cumbria)
Car Model/Spec: Ph2 DT with big Snail.....
Thanks: 0
Dave Wrote: Piston protrusion over deck, jesus thats some serious anal about a gasket thickness! not really how you roll is it, hehe
Thickest one they make to help and drop compression a bit ................. job done
works for me anyhoo!
Posts: 1,748
Threads: 41
Joined: Dec 2011
Reputation:
12 Location: Midlands
Car Model/Spec: Dtractor
Thanks: 0
Am on thinnest to help stop it failing now with decomp
Posts: 433
Threads: 36
Joined: Dec 2011
Reputation:
2 Thanks: 0
Td dan, cheers I'll ask my dad, see if he knows them.
Posts: 5,205
Threads: 91
Joined: Dec 2011
Reputation:
83 Location: Oxfordshire/Cornwall
Car Model/Spec: Moonstone DT/Volvo V50
Thanks: 2
Rods'll be fine.
(16-05-2016, 10:45 AM) Toms306 Wrote: Nanstone GTD5 GT17S - XUD9TE
Volvo V50 D5 R-Design SE Sport - Daily cruise wagon.
Posts: 4
Threads: 0
Joined: Mar 2012
Thanks: 0
40NM + 60 degrees for the crankshaft bolt really :S thought it would be tighter than that lol
Posts: 3,762
Threads: 9
Joined: Dec 2011
Reputation:
19 Location: Northwest (Cumbria)
Car Model/Spec: Ph2 DT with big Snail.....
Thanks: 0
kazzy_306 Wrote: 40NM + 60 degrees for the crankshaft bolt really :S thought it would be tighter than that lol
Thats what these things are for
Posts: 896
Threads: 42
Joined: Apr 2012
Reputation:
2 Location: Lakes District
Car Model/Spec: 1.9 XUD
Thanks: 0
This will come in very handy over the next few days
Posts: 5,494
Threads: 202
Joined: Dec 2011
Reputation:
58 Location: Eastleigh
Car Model/Spec: S16 and HDi daily
Thanks: 2
(05-07-2012, 08:20 PM) c.gerrard Wrote:
Days?
Years..
Welding and fabrication projects undertaken, contact me for more information.
Posts: 248
Threads: 47
Joined: Oct 2013
Reputation:
1 Location: Cambridgeshire
Car Model/Spec: 306 HDi
Thanks: 0
Thats spot on thanks for the great find
Posts: 139
Threads: 11
Joined: Feb 2014
Reputation:
0 Location: Tunbridge Wells
Thanks: 1
Posts: 53
Threads: 11
Joined: Apr 2015
Reputation:
0 Location: Nicosia
Car Model/Spec: '97 Pug 306 1.9 D-Turbo 3dr
Thanks: 8
Country:
That is by far the BEST car guide I have ever seen. I usually used Haynes Manuals, but you need a PhD in Astrophysics to understand whats happening. That is just plain awesome!
Ex cars: '86 Opel Monza 1.6 GLS
& '97 Opel Astra 180ie 16v - oil spill & '07 VW Polo 1.9TDI (stolen) - Awesome car!
"I went to the woods because I wanted to live deliberately. I wanted to live deep and suck out all the marrow of life." - Henry David Thoreau
![[Image: 20A1806D-891D-40FB-BD52-AD519177A607-734...391753.jpg]](http://i35.photobucket.com/albums/d196/mattbush/20A1806D-891D-40FB-BD52-AD519177A607-7340-0000058F46391753.jpg)
![[Image: sigi-2.png]](http://i281.photobucket.com/albums/kk226/darrenjlobb/sigi-2.png)
![[Image: brokendown-1-1-1.jpg]](http://i1054.photobucket.com/albums/s491/n0v0s/brokendown-1-1-1.jpg)
![[Image: signature.png]](http://s22.postimg.org/cgh3ss11t/signature.png)
lol
![[Image: 22f2b6b2-758b-4c1c-96fb-6fa9c6059b13_zpsf306b56b.jpg]](http://i585.photobucket.com/albums/ss299/Ha11elujaz0rs/22f2b6b2-758b-4c1c-96fb-6fa9c6059b13_zpsf306b56b.jpg)
& '97 Opel Astra 180ie 16v - oil spill & '07 VW Polo 1.9TDI (stolen) - Awesome car!