time has come to brake the pug
thought i'd post up quick before it gets filled up with scrap
is lowered on springs and rear beam around 60mm it needs to be able to roll on to truck etc so if suspenshion bits are needed would have to swap them over to keep it moving
scrapping because its rotten,power steering pump let go and need bits off it to finish the non 6 build
https://scontent-lhr3-1.xx.fbcdn.net/hph...e=56D882C6 pic here if it works
thought i'd post up quick before it gets filled up with scrap
is lowered on springs and rear beam around 60mm it needs to be able to roll on to truck etc so if suspenshion bits are needed would have to swap them over to keep it moving
scrapping because its rotten,power steering pump let go and need bits off it to finish the non 6 build
https://scontent-lhr3-1.xx.fbcdn.net/hph...e=56D882C6 pic here if it works