13-11-2015, 04:52 PM
I wanted to update this thread, in case anybody was interested in making this change as well. I ended up staying with the GTI6 setup for now.
But what I found out is that this set should fit any 306\106\ZX\Saxo etc. The only thing you have to worry about is for your wheel to have the proper offset for the caliper to fit, otherwise you're going to need to use a spacer.
One person who installed this setup on his Saxo said he had to use a 5mm spacer with standard steel rims. I'm guessing that if you get alloys with the proper offset value you could get away with a straight fit without any other changes.
But what I found out is that this set should fit any 306\106\ZX\Saxo etc. The only thing you have to worry about is for your wheel to have the proper offset for the caliper to fit, otherwise you're going to need to use a spacer.
One person who installed this setup on his Saxo said he had to use a 5mm spacer with standard steel rims. I'm guessing that if you get alloys with the proper offset value you could get away with a straight fit without any other changes.
