citroen zx Hub nuts and dust caps

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
citroen zx Hub nuts and dust caps
#1
Another one for the zx and maybe 306 lot
I'm replacing the front left bearing (comes with nut) and my rear brake cables are due a change, 
Does the Zx use reusable hub nuts or are they the type you replace
Reply
Thanks given by:
#2
When I did the reasr bearings on my old 1.4 ZX with drums the nut was reuseable afterwards, so was the cap after a bit of tapping back in to shape.

No idea if it should be reusable ot not but I still see it locally and it's not been off again (it took a few chisel taps as I got the cap off and I lined the marks back up, they havent moved)
Reply
Thanks given by:
#3
Cheers mate some are reusable type so it seems the zx has that type Smile
Reply
Thanks given by:
#4
The back ones are one use but...... If you swap them to the other side of the car it will give you a fresh piece of nut to stake into place, the fronts are reusable Smile
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Reply
Thanks given by: kee616
#5
(10-05-2015, 11:10 PM)Mattcheese31 Wrote: The back ones are one use but...... If you swap them to the other side of the car it will give you a fresh piece of nut to stake into place, the fronts are reusable Smile

Excellent cheers matt so il just swap the rears over and it doesn't matter on the front Big Grin
Reply
Thanks given by:
#6
That's the one fella yes, Smile
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Reply
Thanks given by:
#7
Great cheers Smile
Reply
Thanks given by:
#8
(10-05-2015, 11:10 PM)Mattcheese31 Wrote: The back ones are one use but...... If you swap them to the other side of the car it will give you a fresh piece of nut to stake into place, the fronts are reusable Smile
That's so pikey!


I love it! [emoji23]
#2 Moonstone Blue HDI
[Image: 6b0c7309-5184-463c-9f73-2a7b96601418_zpsfdf041fe.jpg]
Reply
Thanks given by:
#9
Haha yes it's pikey, hub nuts are only a few quid each but it's good to know if u cant get hold of any and you need to work on the drums Smile
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Reply
Thanks given by:
#10
If it works it works :p

(11-05-2015, 05:00 AM)kentiiboii Wrote:
(10-05-2015, 11:10 PM)Mattcheese31 Wrote: The back ones are one use but...... If you swap them to the other side of the car it will give you a fresh piece of nut to stake into place, the fronts are reusable Smile
That's so pikey!

Name of a new hit TV show? Haha 
Reply
Thanks given by:


Possibly Related Threads…
Thread Author Replies Views Last Post
  Rear caliper piston dust boot Dangti6 3 1,389 02-05-2016, 03:15 PM
Last Post: Stef205
  Front Caliper Dust Seal Protector Alan_M 2 1,105 27-02-2016, 09:27 AM
Last Post: Alan_M

Forum Jump:


Users browsing this thread: 1 Guest(s)