stef's 205 gti6 supercharged

[Stef205]

 Is that cam sprocket all sorted & happy now after you used the 'FT' torque setting + locktite?!

Well, the belt has been fitted with the cam pulley's at there stops on the adjustment to stop them moving even if they tried. Touch wood so far its been good!


We hope to fit the hydro clutch setup this year, last year i made a full pedal box to accommodate a master cylinder, believe its from a 206 as its very small in size so will tuck behind the engine and clear the manifold. The clutch can remain the same but will have to swap to a be1 bearing and will replace the top mounted be3 clutch arm with a be1 arm which will come out the front of the box and mated to a vr6 slave cylinder. A 406 reservoir to provide fluid rather than two separate tanks. Hopefully this will all work, if not the theory is there.

Still stuggling to get it to drive nicely, while its not helpfully running 350hp through the front wheel it darts around and it becomes very scary even and low speeds and throttle. Still got a few things to try yet!