07-12-2014, 02:57 PM
10mm lines are VERY easy to run. Just get 5-6mm of 10mm fuel line, some jubilee clips, a 10mm priming grenade, a 10mm (3/8ths) fuel filter and the appropriate banjo for the bosch pump. Also some 10mm PVC pipe and a 10mm joiner if you want to have a clear bit to check for air in the system.
The outlet on the in tank pick up is actually very close to 10mm anyway so you can just clamp the pipe onto that and run it under the car and up to the bay next to the return line with a ton of cable ties.
You could probably do it in an hour, certainly under 2.
On my 2.1 it used to suffer terribly with holding back till i swapped the lines and it never happened afterwards even on nearly pure veg. That must of been close on 200bhp with the VNT
The outlet on the in tank pick up is actually very close to 10mm anyway so you can just clamp the pipe onto that and run it under the car and up to the bay next to the return line with a ton of cable ties.
You could probably do it in an hour, certainly under 2.
On my 2.1 it used to suffer terribly with holding back till i swapped the lines and it never happened afterwards even on nearly pure veg. That must of been close on 200bhp with the VNT