First car in UK #HDI PH2#

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
First car in UK #HDI PH2#
#1
Here is my 306, my first car in England! Just had a week ago, have some issues to take a look, my first mod was the replace the key fob, today i removed the spring from the clutch pedal to be more "soft", tomorrow i will to make some things.

Here some priority issues
-Door loom left side, central locking not fully working
-Door central hinges missing
-Brake problem,servo or abs,etc..
-Replace 2 front tyres 185/55 R14
-Buy a Usb Car Radio
-Replace Rear lights
-General check,cambelt,clutch and other things


List of things i would like to make:
-15" Inch wheel or 16 ( Cyclones, nimrod)
- Leather Seats
- Headlight PH3
- Rear windows tinted with film
- Coilovers


[Image: 3pjk.jpg][/URL]
[Image: oavi.jpg]
[Image: goff.jpg]
Reply
Thanks given by:
#2
Seems a good base to start. Have some ph3 lights for sale Smile
Venetian XUD ph2 heaven
Ph3 perv cab heaven
Black ph1 XUD died

Moonstone hdi stage 2
Reply
Thanks given by:
#3
Those rear lights really suit the 306...
Reply
Thanks given by:
#4
(14-02-2014, 09:17 PM)Daniel306 Wrote: Those rear lights really suit the 306...

hope that's a joke . . . .Puke
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Reply
Thanks given by:
#5
Some good plans there. Get it all cleaned up. Put some standard lights on it and get a phase 3 front bumper!
Reply
Thanks given by:
#6
Id be more than happy to donate a set of p3 rear lights foc to rid it of those japanese luxury car lights ...looks a good base otherwise
Reply
Thanks given by:
#7
Updates..
- Rear lights on it's way next week..
- Today i replaced 2 front tyres, many thanks to the guys from Crazy Tyres on T.Wells near Asda.
- Have to change Drive Belt and Timing Belt in the near future
- 187000miles on the road Smile

[Image: pvop.jpg]
[Image: h2my.jpg]
Reply
Thanks given by:
#8
And the number plates are covered up because?
Reply
Thanks given by:
#9
Back in Portugal i normally i covered up, safety measure, don't how it work here..
Reply
Thanks given by:
#10
Fair enough if he doesn't want to put his registration on the internet.

Considered putting a Ph.3 'sport' spec bumper on with the round fogs jonas?
This post is an artistic work of fiction and falsehood. Only a fool would take anything posted above as fact.

62k Diablo Phase 1 Gti-6:
Project Thread
Reply
Thanks given by:
#11
(17-02-2014, 11:17 AM)RetroPug Wrote: Fair enough if he doesn't want to put his registration on the internet.

Considered putting a Ph.3 'sport' spec bumper on with the round fogs jonas?

Could be interested, but for now i will change the belts, and after that will consider "upgrades"!

I'm looking for the pair for front doors..
[Image: q9d7.jpg]
Reply
Thanks given by:
#12
Today arrived my rear lights, OEM look yeah!
I kind of see out look this wheels on a 306! as anyone putted ones?
[Image: vxfr.jpg]
Reply
Thanks given by:
#13
those central hinges, are called 'check straps' as far as i know. May help you in our search.

They just make the door stop at certain points as you open it, so it wont close on you itself.
Reply
Thanks given by:
#14
(18-02-2014, 02:58 PM)mcglynn Wrote: those central hinges, are called 'check straps' as far as i know. May help you in our search.

They just make the door stop at certain points as you open it, so it wont close on you itself.

Yeah that's what I need to put my doors functional..Thanks
Reply
Thanks given by:
#15
Just spotted your location, you're not a million miles from me, probably about 45 minutes drive! I'm not the worlds best mechanic (as some of the members on here will testify), but if you need an extra pair of hands with anything, gimme a shout. Smile

Glad you've got some standard rear lights to put on, those lexarse lights are shocking. lol And fair play if you don't wanna reveal your number plates on the internet, i know a lot of us don't bother, but its still probably safer to cover them! Wink
[Image: P1060836_zpsz3xgxt7q.jpg]
Reply
Thanks given by:
#16
(18-02-2014, 03:52 PM)WiNgNuTz Wrote: Just spotted your location, you're not a million miles from me, probably about 45 minutes drive! I'm not the worlds best mechanic (as some of the members on here will testify), but if you need an extra pair of hands with anything, gimme a shout. Smile

Glad you've got some standard rear lights to put on, those lexarse lights are shocking. lol And fair play if you don't wanna reveal your number plates on the internet, i know a lot of us don't bother, but its still probably safer to cover them! Wink

Thanks mate, good to know your help, lucky i have a workshop to use when need! by the end of the week, hope to replace the belts and water pump!
Reply
Thanks given by:
#17
that wheels suits nice on the 306 but with the 195/45 and 18mm spacers on back and 10mm on front maybe (depends of your drop)
[Image: sign.png]
↑ Project ↑
Reply
Thanks given by:
#18
Hello,

I have a set of phase 3 headlights.
Reply
Thanks given by:
#19
(22-02-2014, 06:00 PM)Seid Wrote: that wheels suits nice on the 306 but with the 195/45 and 18mm spacers on back and 10mm on front maybe (depends of your drop)

I won a cyclones wheels auction with tyres! Anyone interested in mine?

(22-02-2014, 06:07 PM)Pompey306mark Wrote: Hello,

I have a set of phase 3 headlights.

Thanks, but the headlights don't need for now..

Here is an update..
Rear lights on!
[Image: Image101.jpg]
image upload no compression

A little present
[Image: Image103.jpg]
screenshot utility

And Cyclones on the way, need to sell mines, anyone interested?
Reply
Thanks given by:
#20
Today Update
Fuel Filter Replaced (Very Bad)
[Image: eiqwqa.jpg]
Outside wash
[Image: 1zqa5ig.jpg]
[Image: vhtj7c.jpg]

Waiting for the check straps to put them on place...
[Image: wnvxd.jpg]
Reply
Thanks given by:
#21
Today's MOT
Chassis Leg excessively corroded
Steering gaiter split offside front
Track rod end nearside front and front brake pads

Got to work on it this week! Smile
Reply
Thanks given by:


Forum Jump:


Users browsing this thread: 1 Guest(s)