PROJECT - Keep me in a 306

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
PROJECT - Keep me in a 306
#1
Hi all, you may have seen my thread about losing faith in MYA and debating the scrapyard. I have discussed the jobs with ozonehostile (Zac) and my car is booked in with him on the 05/04/14.

The jobs to do : -

- Cambelt/waterpump/tensioner/bosch conversion
- replace a pair of p-bushes - berlingo ones
- check the front brakes as they vibrate, checked and the discs had small runout, so will also check caliper runners to see if they are sticking/requires regreasing.
- change a pair of front wings
- change the side skirts
- weld up the 5dr rust hole on the rear passenger arch/pillar - can you speak to your mate andf get a price etc?
- fit twin optic stalk - hopefully getting one from Dumdum via the cheddar meet
- maybe other small jobs

If Zac and myself would really appreciate some spare pairs of hands to get the multiple jobs done, i could offer treats but i'm not sure what people would like?

With the above jobs done i will be back to loving MYA and not contemplating scraping her

List of willing hands: -

Devils_fuel
ozonehostile

Meet details: -

Location - Hereford - i will let zac post or PM these
Time - TBC but early as poss
[Image: siggy1.jpg]

the smokey old bus that sounds like a tractor...
Reply
Thanks given by:
#2
For those looking, a rough postcode to work off is HR2 9AS

located about 30 miles from the m50, pretty easy to get to from there or the m5
Current stable
'09 Mercedes E320cdi wagon 
'99 306 gti6
Reply
Thanks given by:
#3
Group effort to finish the truck tub too? :-P haha

As incentive to come, there is a dog called Susan, she will eat anything. Unlimited entertainment
Current stable
'09 Mercedes E320cdi wagon 
'99 306 gti6
Reply
Thanks given by:
#4
(05-03-2014, 01:27 PM)ozonehostile Wrote: Group effort to finish the truck tub too? :-P haha

As incentive to come, there is a dog called Susan, she will eat anything. Unlimited entertainment

Anything you say Dodgy

lol
[Image: Cn91r40h.jpg] 
Astor 6 Fast road/track project
Reply
Thanks given by:
#5
(05-03-2014, 01:51 PM)7057sam Wrote:
(05-03-2014, 01:27 PM)ozonehostile Wrote: Group effort to finish the truck tub too? :-P haha

As incentive to come, there is a dog called Susan, she will eat anything. Unlimited entertainment

Anything you say Dodgy

lol

Your mind goes to dark places dude :-P haha
Current stable
'09 Mercedes E320cdi wagon 
'99 306 gti6
Reply
Thanks given by:
#6
(05-03-2014, 01:27 PM)ozonehostile Wrote: Group effort to finish the truck tub too? :-P haha

As incentive to come, there is a dog called Susan, she will eat anything. Unlimited entertainment

If we finish at a sensible time I will help with the truck tub - can't be too late as have a family Smile

What needs doing?

(05-03-2014, 01:51 PM)7057sam Wrote:
(05-03-2014, 01:27 PM)ozonehostile Wrote: Group effort to finish the truck tub too? :-P haha

As incentive to come, there is a dog called Susan, she will eat anything. Unlimited entertainment

Anything you say Dodgy

lol

lol
[Image: siggy1.jpg]

the smokey old bus that sounds like a tractor...
Reply
Thanks given by:
#7
Many many things lol. Probably only a couple of days work tbh but just can't be bothered at the moment :-\
Current stable
'09 Mercedes E320cdi wagon 
'99 306 gti6
Reply
Thanks given by:
#8
Im probably going too be castrated by the GF but you know im always willing so count me in** Smile

**Aslong as we can go to the breakfast bar again in as many 306's as we can find Tongue Hereford breakfast meet FTW!
[Image: 17b33c2a-8471-4313-992e-0a4b324cf926_zps2e63812a.jpg]
Team Cyril
Reply
Thanks given by:
#9
(05-03-2014, 03:22 PM)Matt-Rallye Wrote: Im probably going too be castrated by the GF but you know im always willing so count me in** Smile

**Aslong as we can go to the breakfast bar again in as many 306's as we can find Tongue Hereford breakfast meet FTW!

Haha definitely this.


Hopefully beat the previous record of 8 pugs outside my unit at once :-D
Current stable
'09 Mercedes E320cdi wagon 
'99 306 gti6
Reply
Thanks given by:
#10
Date dependent, i may be able to do this. Have a welder too, so can fix the rust for free.
306 HDi Deathtrap - 130bhp / 220lbft
...UPGRADING...



Reply
Thanks given by:
#11
I wont be able to make the 5th, don't finish work till 4pm. Might give you a call and if its looking like a late one I'll pop by.
Reply
Thanks given by:
#12
I'm hoping to get my gti6 on the road this week, so it could be a good run out for it.

I'm as useless as a chocolate fire guard! But I can make mean cups of teas!

I'm also good at passing tools!
#2 Moonstone Blue HDI
[Image: 6b0c7309-5184-463c-9f73-2a7b96601418_zpsfdf041fe.jpg]
Reply
Thanks given by:
#13
(05-03-2014, 03:26 PM)ozonehostile Wrote:
(05-03-2014, 03:22 PM)Matt-Rallye Wrote: Im probably going too be castrated by the GF but you know im always willing so count me in** Smile

**Aslong as we can go to the breakfast bar again in as many 306's as we can find Tongue Hereford breakfast meet FTW!

Haha definitely this.


Hopefully beat the previous record of 8 pugs outside my unit at once :-D

Mine will be in bits so we'll be one pug down lol

(05-03-2014, 03:22 PM)Matt-Rallye Wrote: Im probably going too be castrated by the GF but you know im always willing so count me in** Smile

**Aslong as we can go to the breakfast bar again in as many 306's as we can find Tongue Hereford breakfast meet FTW!

Thanks fella, tell the g/f it's MYA's fault...actually tell her it's my fault, she may think you are cheating on her lol

(05-03-2014, 07:06 PM)Poodle Wrote: Date dependent, i may be able to do this. Have a welder too, so can fix the rust for free.

5th April mate. It would be nice to meet you anyway Smile

Zack have you got any metal for the repair and any paint to cover the resultant repair or shall I get some - which paint???

(05-03-2014, 07:15 PM)Dum-Dum Wrote: I wont be able to make the 5th, don't finish work till 4pm. Might give you a call and if its looking like a late one I'll pop by.

Hopefully we should be finished by 4pm, if not man hug it is lol

(05-03-2014, 08:18 PM)kentiiboii Wrote: I'm hoping to get my gti6 on the road this week, so it could be a good run out for it.

I'm as useless as a chocolate fire guard! But I can make mean cups of teas!

I'm also good at passing tools!

Would be nice to meet you and the 6, fingers crossed for you mate Smile

Just looking on GSF and there are 2 cambelts, 2 water pumps and 3 tensioners for my car...help as I've never changed these parts so I'm kerfuffled and don't want to buy the wrong parts !

It's a 96/97 (P43 MYA) lxtd with aircon, no sunroof or abs
[Image: siggy1.jpg]

the smokey old bus that sounds like a tractor...
Reply
Thanks given by:
#14
Cheers man be nice to meet you too, and to see the rest of you seeing as last time was fcs!
I have that week of work so hopefully a lot of work will be done.
#2 Moonstone Blue HDI
[Image: 6b0c7309-5184-463c-9f73-2a7b96601418_zpsfdf041fe.jpg]
Reply
Thanks given by:
#15
Definately bring that 6 for a run Big Grin and aslong as you can pass tools and make tea your welcome in any workshop i happen to be spannering in Tongue

Also im one of the very few lucky people with a car sympathetic girlfriend lol Shes quite happy to f*ck off with her mates while im arsing around with broken peugeots Smile

(05-03-2014, 08:29 PM)devils_fuel Wrote: Just looking on GSF and there are 2 cambelts, 2 water pumps and 3 tensioners for my car...help as I've never changed these parts so I'm kerfuffled and don't want to buy the wrong parts !

It's a 96/97 (P43 MYA) lxtd with aircon, no sunroof or abs

Best to ring them with your reg, Should be spot on then Smile
[Image: 17b33c2a-8471-4313-992e-0a4b324cf926_zps2e63812a.jpg]
Team Cyril
Reply
Thanks given by:
#16
Matt they say all the parts fit my car lol but the parts are very different lol
[Image: siggy1.jpg]

the smokey old bus that sounds like a tractor...
Reply
Thanks given by:
#17
(05-03-2014, 08:29 PM)devils_fuel Wrote: 5th April mate. It would be nice to meet you anyway Smile

Lol! /eyesfail.

Ok that should be fine, I can almost certainly bring some suitable scrap metal too. Might be worth finding someone else to do the shaping if you want it to look pretty though lol.
306 HDi Deathtrap - 130bhp / 220lbft
...UPGRADING...



Reply
Thanks given by:
#18
(06-03-2014, 06:04 PM)Poodle Wrote:
(05-03-2014, 08:29 PM)devils_fuel Wrote: 5th April mate. It would be nice to meet you anyway Smile

Lol! /eyesfail.

Ok that should be fine, I can almost certainly bring some suitable scrap metal too. Might be worth finding someone else to do the shaping if you want it to look pretty though lol.

Ha ha hard day at work?

It's the inside of the pillar where the upper seat belt bolts to the car, so it's hidden by the interior plastics - the common inner arch 5dr rot lol I have a full plastic arch liner to fit

Do you have a small amount of under seal to seal it, by any chance?
[Image: siggy1.jpg]

the smokey old bus that sounds like a tractor...
Reply
Thanks given by:
#19
200 miles each way for me, bit far i think Sad
Doesnt even own a 306.
Reply
Thanks given by:
#20
(06-03-2014, 07:28 PM)Tom Wrote: 200 miles each way for me, bit far i think Sad

That's a nice run in the 205 Wink
[Image: siggy1.jpg]

the smokey old bus that sounds like a tractor...
Reply
Thanks given by:
#21
If I get the Merc and haven't had a chance at a long run in it I might cruise down with my hammer collection Smile
[Image: tapatalk_1427020983519_zpsnwvozlhb.jpeg]
Reply
Thanks given by:
#22
170 miles each way for me. Bit much otherwise id be on a nice 306 OC meet!
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Reply
Thanks given by:
#23
Only a 4hr drive each way for me, much as I'm all for lending a hand, that's a touch too far for my shed of a motor! lol
[Image: P1060836_zpsz3xgxt7q.jpg]
Reply
Thanks given by:
#24
Mate i get bored driving from mine to exeter, which is one hour if that lol.
Doesnt even own a 306.
Reply
Thanks given by:
#25
(06-03-2014, 10:47 PM)THE_Liam Wrote: If I get the Merc and haven't had a chance at a long run in it I might cruise down with my hammer collection Smile

Do it hammer man

(06-03-2014, 11:04 PM)WiNgNuTz Wrote: Only a 4hr drive each way for me, much as I'm all for lending a hand, that's a touch too far for my shed of a motor! lol


(06-03-2014, 10:47 PM)Niall Wrote: 170 miles each way for me. Bit much otherwise id be on a nice 306 OC meet!


(06-03-2014, 11:22 PM)Tom Wrote: Mate i get bored driving from mine to exeter, which is one hour if that lol.

You get bored of driving Tom or just the 205? Lol

Thanks guys Smile
[Image: siggy1.jpg]

the smokey old bus that sounds like a tractor...
Reply
Thanks given by:
#26
Just sitting in the car for that long just boringly cruising.
Doesnt even own a 306.
Reply
Thanks given by:
#27
(06-03-2014, 11:39 PM)Tom Wrote: Just sitting in the car for that long just boringly cruising.

I get bored and mind wonders after 1 junction on m1
#2 Moonstone Blue HDI
[Image: 6b0c7309-5184-463c-9f73-2a7b96601418_zpsfdf041fe.jpg]
Reply
Thanks given by:
#28
Same here, just get zoned out as it's all hunky dory lol
[Image: siggy1.jpg]

the smokey old bus that sounds like a tractor...
Reply
Thanks given by:
#29
if I get the problems with the estate sorted ill be up for lending a hand Smile
Reply
Thanks given by:
#30
(06-03-2014, 06:07 PM)devils_fuel Wrote:
(06-03-2014, 06:04 PM)Poodle Wrote:
(05-03-2014, 08:29 PM)devils_fuel Wrote: 5th April mate. It would be nice to meet you anyway Smile

Lol! /eyesfail.

Ok that should be fine, I can almost certainly bring some suitable scrap metal too. Might be worth finding someone else to do the shaping if you want it to look pretty though lol.

Ha ha hard day at work?

It's the inside of the pillar where the upper seat belt bolts to the car, so it's hidden by the interior plastics - the common inner arch 5dr rot lol I have a full plastic arch liner to fit

Do you have a small amount of under seal to seal it, by any chance?

I'll bring the waxoyl with me lol
[Image: 17b33c2a-8471-4313-992e-0a4b324cf926_zps2e63812a.jpg]
Team Cyril
Reply
Thanks given by:


Forum Jump:


Users browsing this thread: 2 Guest(s)