Can somebody help me out please

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Can somebody help me out please
#1
Right then, I have bought a set of morrettes with no inners. The man beam and indicators work but there is damage I weren't told about.

So my question is, where do I get new parts from and what specific ones do I need? I do want to stay standard and not go down the xenon route but I'm struggling finding new parts fairly cheapish.
Also what size are the inners and where would I get trumpets from that are long enough and flexible enough to direct to my air filter?

Any help much appreciated!!
Reply
Thanks given by:
#2
pics maybe handy here...

what exactly do you mean by 'inners'?! if no inners are present then there wouldnt be a main beam and aint the indicators seperate anyway?!
Wishes for more power...
Reply
Thanks given by:
#3
The inners are the driving lamps I have ph1 morrettes here I can measure the lamps if you want?
[Image: SDC10442-1.jpg]
Reply
Thanks given by:
#4
Don't know if i'm missing something obvious here, but don't you have a tape measure?

Also, don't spend ages looking for a flexi-trumpet when you could just buy a trumpet and some flexihose, much easier. Big Grin Any local hosing or hydraulics specialist should be able to get you some flexi-hose in a suitable size/format. Same goes for electrical specialists and some suitable lamps tbh. Or there's the usual online options - demon-tweeks, spoox, etc.
306 HDi Deathtrap - 130bhp / 220lbft
...UPGRADING...



Reply
Thanks given by:
#5
Don't know if i'm missing something obvious here, but don't you have a tape measure?

Also, don't spend ages looking for a flexi-trumpet when you could just buy a trumpet and some flexihose, much easier. Big Grin Any local hosing or hydraulics specialist should be able to get you some flexi-hose in a suitable size/format. Same goes for electrical specialists and some suitable lamps tbh. Or there's the usual online options - demon-tweeks, spoox, etc.

yes I have measured them lol and I know the main lamps are called cibie 100e but I don't know what the indicators are called and where to get them from but its like I say, cost. If I get all brand new parts at like £30 each etc as I have seen I might aswell buy a full set of somebody else.

Good shout on the trumpets, heres pics:

   

   

   
[Image: attachment.php?aid=9919]
Reply
Thanks given by:
#6
are the indies not just ph1 indies??

£6 each new if thats truw
Wishes for more power...
Reply
Thanks given by:
#7
You can still buy them new from morrette
Overall Road Going Production Class Winner at BARC Gurston Down Speed Hillclimb 2012, 2013 & 2014 With a class record along the way (For a while), Taking 2nd place will be Ian Redding's 306 GTi
2016 Castle Combe GT championship class winner
Reply
Thanks given by:
#8
(18-09-2013, 07:53 PM)Piggy Wrote: are the indies not just ph1 indies??

£6 each new if thats truw

I am not sure? Can anybody confirm this please?

(18-09-2013, 08:21 PM)miles Wrote: You can still buy them new from morrette

Cheers bud will have a look
[Image: attachment.php?aid=9919]
Reply
Thanks given by:


Forum Jump:


Users browsing this thread: 1 Guest(s)