Bolt on GT2052s Turbo

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Bolt on GT2052s Turbo
#1
Gauging interest really

Have got a GT2052s with adaptor plates ready to bolt on an XUD

With exhaust mani and k14 elbow (opened up)

Prob has an oil drain still attached (I used one of k14/t2)

and I might have an oil feed kicking about (or you can get one made up real easy, or buy one off Jenkosowls)

Might need an actuator as think I nabbed it for something else, I'll check.

Also have another gt2052s that I had as a spare incase this went bang, so would consider selling as a job lot or separately.

Can also fit if required.

Open to sensible offers, bearing in mind people are asking £175 for a bolt on td04 and the gt20s are £150 ish on their own Smile

[Image: 26A1C385-5F9F-49CC-A73F-B337F8E00BDA-793...08005C.jpg]
[Image: 92CBDCF7-1241-4125-90E5-79D7D38A2575-793...3ECF8B.jpg]

gt20 is turbo on the right next to jammpics gt25 hybrid
Reply
Thanks given by:
#2
wanker! . . . . this is a good turbo for the XUD isn't it? . . . . .ahh i have my TD04 to go on now so fcuk it . lol
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Reply
Thanks given by:
#3
Its quite an epic turbo, practically no lag
Reply
Thanks given by:
#4
why you getting rid if you don't mind me asking? also what 'bines you running on the other cars? . .Smile
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Reply
Thanks given by:
#5
I replaced it with the gt25 hybrid, and its been sat on the shelf ever since

Now I've gone VNT on my black one, and still running a tdo4 on the silver one.

I've been hoarding turbos :/
Reply
Thanks given by:
#6
Price fitted?
Peugeot 206 GTI HDI
Volvo V50 2.0d
Volvo XC90 D5







Reply
Thanks given by:
#7
What price you after??



Reply
Thanks given by:
#8
With no oil line or actuator I'd say around £130 sounds fair.
Supercharged GTi6 Build
S14 Zenki Build
[Image: signature.png]
Reply
Thanks given by:
#9
(29-04-2013, 07:47 PM)silverzx Wrote: With no oil line or actuator I'd say around £130 sounds fair.

Hardly. I know as well as anyone that GT20's aren't TD04 cheap. Factor in this is ready to bolt on, an actuator can be had on the cheap or re-use a T2/K14 one like I did.

All in, and for the performance, i'd say £200 is more than fair. We're not talking 100k mile TD04 here.
[Image: signature_zps1a02ba79.jpg]
Reply
Thanks given by:
#10
I havent got an xud and I'm still tempted. Whats your best price posted?
Supercharged XUD Project - Dead

HDi Cabby Project Click
Reply
Thanks given by:
#11
(29-04-2013, 08:01 PM)cwspellowe Wrote:
(29-04-2013, 07:47 PM)silverzx Wrote: With no oil line or actuator I'd say around £130 sounds fair.

Hardly. I know as well as anyone that GT20's aren't TD04 cheap. Factor in this is ready to bolt on, an actuator can be had on the cheap or re-use a T2/K14 one like I did.

All in, and for the performance, i'd say £200 is more than fair. We're not talking 100k mile TD04 here.


^ This, would be looking for offers above 200 really

Thought I'd ask here before taking the plates off and selling it as a 'standard' turbo
Reply
Thanks given by:


Possibly Related Threads…
Thread Author Replies Views Last Post
  FOR SALE: gt2052s turbo zx_volcane 4 1,598 26-01-2016, 02:41 PM
Last Post: zx_volcane
  FOR SALE: SOLD - GT2052S Bolt on XUD Kit silverzx 9 2,548 24-10-2015, 06:12 PM
Last Post: silverzx
  Gt2052s. bashbarnard 3 1,484 29-09-2015, 07:59 PM
Last Post: bashbarnard

Forum Jump:


Users browsing this thread: 1 Guest(s)