Posts: 2,963
Threads: 100
Joined: Dec 2011
Reputation:
12
Location: Portsmouth
Car Model/Spec: 306 dturbo Ultra Spec
Thanks: 0
Given 0 thank(s) in 0 post(s)
Right there are lots of comment on the forum. Yes the rear bench will fit.
But the rear catches don't line up.
So what I want to know has anyone either, modified the latches so they line up and lock.
Or.
Stripped the covers and foam off the 5 door seat and fitted to the 3 door metal frame.
Friend of mine is interested and has not got around to joining up.
Thanks for the help.
Posts: 6,367
Threads: 87
Joined: Dec 2011
Reputation:
48
Location: South Yorks.
Car Model/Spec: Rouge vallelunga 5 door Dturbo
Thanks: 2
Given 74 thank(s) in 70 post(s)
(29-01-2013, 07:16 PM)Pompey306mark Wrote: Right there are lots of comment on the forum. Yes the rear bench will fit.
But the rear catches don't line up.
So what I want to know has anyone either, modified the latches so they line up and lock.
Or.
Stripped the covers and foam off the 5 door seat and fitted to the 3 door metal frame.
Friend of mine is interested and has not got around to joining up.
Thanks for the help.
you could swap the covers mate . .not too hard, i've done it the other way round, 3 door into 5 door and the catches don't line up so i removed them and grinded the hole a bit bigger . .
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Posts: 1,116
Threads: 28
Joined: Dec 2011
Reputation:
2
Location: Lost In Music between London and Kent
Car Model/Spec: Phase 4 Silver HDi Estate
Thanks: 0
Given 1 thank(s) in 1 post(s)
i swapped bases and foam on a previous 306
