7x16 wheels

[Pugwash]

Hi there,

I have a Phase 3 306gti lowered on eibach and bilsteins.

I'm Looking at a set of alloys 7x16. Will these rub with 205/45 16 tyres on them or will I have to get the arches rolled?

thanks

[Stef205]

depends on the offset of the wheels

[Pugwash]

I just had a look and it says ET15.

---

These are the wheels,

http://www.ebay.co.uk/itm/4x-16x7-Alloy-...SwtfhYswkz

[zx_volcane]

205/45/16 should be ok

i ran them on my zx without issue

[Pugwash]

Thats great thanks

[Ben]

They'll be spot on that's what I've run on my last two 306's

[Pugwash]

Cool thanks, do you have a set of those alloys on your car?

[fatlapit]

would these size wheels fit over 330 brakes??

[welshpug]

depends on the profile of the rim, a motorsport wheel wiuld if its a motorsport type caliper.



310 goes under 15" so 330 under 16" should have a smidgen more room.

also if the rotor swept area is smaller and the pcd larger you may be able to move the disc in more over the balljoint.

[fatlapit]

I have tarox 10 pots and theres a fair gap to my 17s possibly more than an inch.

[zx_volcane]

I have tarox 10 pots and theres a fair gap to my 17s possibly more than an inch.

10 pots?

good gravy ...

[fatlapit]

yeah man