Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Things left to do before fcs
#1
So for me on the estate its cambelt, service, axle lower, dront struts on map.

Then service lus, p bushs and detial

Just wondered what everyone else needed to do before as well
On a break from 306oc for personal reasons. If anyone needs or wants me most of you have my number and or facebook messenger
Thanks for the good times guys n gals. I might be back. Who knows.
#2
seam wlded sub frame
heater matrix
ds2500 pads
spare wheel
track tyres on
bolt check
5.1 fluid
fire extinguisher
clean
balance bodies
wiring
engine mounts

and much much more!
#3
206...service next week as its due in 400miles.
306...finish off cooling aids....
"airbox"
Service engine
Servive brakes
Bolt n general check
Fit undertray
Meth injection
Wash and first wax of the year.
Maybe tidy up inside a bit
Wishes for more power...
#4
Passenger side track rod end, airbag replaced with glovebox and a damn good clean
#5
Fit oil cooler so can stay out longer on track / reduce risk of fking the engine
Fit thermal intake gasket without a vacuum leak
Sort out front tyre as it's taken some abuse
Gearbox oil
Fix abs sensor issue
[Image: mcetg0.png]

ZR VVC Homebrew mapping project: http://306oc.co.uk/forum/showthread.php?tid=14360
#6
Things left to do before fcs...

oil change
fit track disc/pads
balance some wheels
clean the girl
general nut n bolt check

https://www.check-mot.service.gov.uk/
GTI6 Info

Don’t drive faster than your guardian angel can fly.

#7
Front left and right trackrods, do want to sort the front bumper as the skin has come away on the passanger side.
Given the choice between Niall and the sheep. I would choose the sheep!
/Toseland
#8
Blend in the paint on the rear arches after I did such a shit job of rolling them on the track side.

clean inside and out.

track front wheels

nuts and bolts check
#9
(21-05-2016, 08:02 AM)cully Wrote: Things left to do before fcs...

oil change
fit track disc/pads
balance some wheels
clean the girl
general nut n bolt check

https://www.check-mot.service.gov.uk/
GTI6 Info

Don’t drive faster than your guardian angel can fly.

#10
Swap tyres front to rear, fill with fuel*, check new tent came with pegs, find BBQ






*I'm probably going to have to fill with fuel at least 4 times before FCS if not 5 or 6 times. Smiles per gallon FTW.
#11
Sort constant heat problem

Idle / revving problem

Adjust suspension to be stiffer

Fix knock on front left

Fix ABS system

Change wheels / tyres

Full detail

And more depending what parts I can get hold of lol



Sent from my iPhone using Tapatalk
#12
Not a huge amount tbh.

Try and find/fix boost leak (well it sounds like it has one)
Maybe fit powerflex bushes on suspension arms
Give it a decent clean
#13
(20-05-2016, 09:41 PM)bashbarnard Wrote: So for me on the estate its cambelt, service, axle lower, dront struts on map.

Then service lus, p bushs and detial

Just wondered what everyone else needed to do before as well

so mines done apart from map and clean now done it all yesterday
On a break from 306oc for personal reasons. If anyone needs or wants me most of you have my number and or facebook messenger
Thanks for the good times guys n gals. I might be back. Who knows.
#14
nothing at all, Going to Bournemouth wheels which for me is much better
Overall Road Going Production Class Winner at BARC Gurston Down Speed Hillclimb 2012, 2013 & 2014 With a class record along the way (For a while), Taking 2nd place will be Ian Redding's 306 GTi
2016 Castle Combe GT championship class winner
#15
Finish the strut brace and fit
Align exhaust
Clean a lot
Done
[Image: 20A1806D-891D-40FB-BD52-AD519177A607-734...391753.jpg]
TEAM CONROD SHITTING RALLYE!
#16
(22-05-2016, 01:09 PM)Frosty Wrote: Maybe fit powerflex bushes on suspension arms
Give it a decent clean

Remember to do your tracking after, because they change the geometry slightly
#17
Clean and give a full detailing... that's all
Phaes 1 GTI 6  -  Onyx Black
#18
(23-05-2016, 07:07 AM)ginge191 Wrote: Buy less of a hairdresser's car... that's all


EFA
Given the choice between Niall and the sheep. I would choose the sheep!
/Toseland
#19
(23-05-2016, 12:30 AM)Matt Wrote: Finish the strut brace and fit
Align exhaust
Clean a lot
Done

We having a cleaning day?! Doing mine on the Thursday, you about?

(23-05-2016, 07:22 AM)toseland Wrote:
(23-05-2016, 07:07 AM)ginge191 Wrote: Buy less of a hairdresser's car... that's all


EFA

The megane is no 'cc' model!
Phaes 1 GTI 6  -  Onyx Black
#20
(23-05-2016, 06:53 AM)Paul_13 Wrote:
(22-05-2016, 01:09 PM)Frosty Wrote: Maybe fit powerflex bushes on suspension arms
Give it a decent clean

Remember to do your tracking after, because they change the geometry slightly

Will do cheers
#21
change ex cam seal

put fuel in see how long gearbox lasts for
#22
Loads I want to do, but realistically >

Get exhasut downpipe sorted with a flexi.

Get a good wash and polish on the go.

Hope it doesn't blow up.

Would love to get some tuning in too, in proper need of setting up since the rebuild.
#23
(23-05-2016, 07:24 AM)ginge191 Wrote:
(23-05-2016, 12:30 AM)Matt Wrote: Finish the strut brace and fit
Align exhaust
Clean a lot
Done

We having a cleaning day?! Doing mine on the Thursday, you about?

(23-05-2016, 07:22 AM)toseland Wrote:
(23-05-2016, 07:07 AM)ginge191 Wrote: Buy less of a hairdresser's car... that's all


EFA

The megane is no 'cc' model!

I'm game, I've got the whole weekend of so will see what I am working Thursday Smile
[Image: 20A1806D-891D-40FB-BD52-AD519177A607-734...391753.jpg]
TEAM CONROD SHITTING RALLYE!
#24
(20-05-2016, 09:46 PM)Piggy Wrote: 206...service next week as its due in 400miles.
306...finish off cooling aids....
"airbox"
Service engine
Service brakes
Bolt n general check
Fit undertray
Meth injection
Wash and first wax of the year.
Maybe tidy up inside a bit
Polish up wheel bolts
Finish off oil cooler
Rear camera mount
Fit battery fuses

Internal central camera mount

I like adding to lists and immediately crossing things out... Feeling of accomplishment Rofl
Wishes for more power...
#25
My list now has added to it:
Get wheel bearing changed
Fit new pads and discs at the front
Add more cable ties
Top up coolant
Top up pas fluid
#26
I now need to change the throttle cable too


Sent from my iPhone using Tapatalk
#27
(25-05-2016, 07:46 AM)rocker8742 Wrote: I now need to change the throttle cable too


Sent from my iPhone using Tapatalk

I will prob change mine too because my throttle cable is soooooo long it looks naff. Slightly shorter of the xsi 16v so will get one of those me thinks
#28
(25-05-2016, 11:49 AM)Xsikid Wrote:
(25-05-2016, 07:46 AM)rocker8742 Wrote: I now need to change the throttle cable too


Sent from my iPhone using Tapatalk

I will prob change mine too because my throttle cable is soooooo long it looks naff. Slightly shorter of the xsi 16v so will get one of those me thinks


Mine just snapped this morning lol
#29
(24-05-2016, 10:01 PM)Dum-Dum Wrote: My list now has added to it:
Get wheel bearing changed
Fit new pads and discs at the front
Add more cable ties
Top up coolant
Top up pas fluid

And now add to that new calipers both sides as it turns out that at least half the pistons on the nearside are seized, one can't be budged and I've been told if the nearside is like that then the drivers is probably not far behind so might as well replace both.

Anything else goes wrong and I'm gonna have to sell my track time.
#30
How about just reduce your alcohol budget so you'll be sober enough to use the tracktime? Tongue
Wishes for more power...


Forum Jump:


Users browsing this thread: 1 Guest(s)